Craftsman 358.352680 - 18 IN. BAR manual S .or.ope, t I.,I, _._ switch

KNOWYOURSAW READTHISOPERATOR'SMANUALANDSAFETYRULESBEFOREOPERAT-

ING YOUR CHAIN SAW, Compare the illustrations with your unit to familiarize

yourself with the location of the various controls and adjustments. Save this manual for future reference.

r Too, " Hand Guard.---_ A_._. Handle

	k		S .or.ope
	"NL		.1
	t I.,I	I_	/_._ switch
Chain	Muffler _	.	Pdmer

Bar Oil Fill Cap Housing Fuel Mix FillCap

Cylinder Cover

Fast Idle

Adjusting	Chain
Screw	Direction
	of Travel

Throttle	Choke	}	Bar Clamp Nuts Guide Bar
Tdgger	Knob Bar Clamp	Chain
		Catcher

ON/STOP SWITCH

The ON/STOP Switch is used to stop the engine.

THROTTLE TRIGGER

The throttle trigger controls engine speed.

THROTTLE LOCKOUT

The throttle lockout must be pressed before you can squeeze the throttle trig- ger. This feature prevents you from ac- cidentally squeezing the trigger.

FAST IDLE LOCK

The fast idle lock holds the throttle trig- ger in the starting position, Activate the fast idle lock by pressing the throttle

lockout and squeezing the throttle trig- ger. With the throttle trigger squeezed, press the fast idle lock. Release the

throttle lockout and trigger while holding the fast idle lock button.

CHOKE KNOB

The Choke Knob activates the choke to provide additional fuel to the engine during cold starting.

PRIMER BULB

The Primer Bulbcirculates fuel to the

carburetorto providequicker starting,

CHAIN TENSION

It is normal for a new chain to stretch

during first 30 minutes of operation. You should check your chain tension fre- quently. See Chain Tension under the Service and Adjustments section.

6