KNOW YOUR TRIMMER
READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations with your unit to familiarize yourself with the loca-
tion of the various controls and adjustments. Save this manual for future refer- ence.
Plug |
|
|
| Assist | Handle |
Cord |
|
|
Retainer |
|
|
Trigger | Button | Motor Housing |
Switch |
| J |
| Air Vents | Edge Guide |
|
|
| 0.065" line |
Twist and Edge | "_"" Tap Button |
Button | Line Limiter Blade |
Debris Shield |
RECESSED PLUG
The RECESSED PLUG is where you at- tach your extension cord to the unit.
TRIGGER SWITCH
The TRIGGER SWITCH is used to turn
on the unit. Squeeze the trigger switch to operate the unit.
LINE LIMITER
The LINE LIMITER cuts tile cutting line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold and guide the unit.
HANDLE BUTTON
The HANDLE BUTTON is used to adjust the upper handle to a comfortable op- eratin_ position.
SEMI-AUTOMATIC HEAD
The
cutting line and rotates during opera- tion.
TWIST AND EDGE BUTTON
The TWIST AND EDGE BUTTON is used
to twist the lower portion of the unit into an edging position.
EDGE GUIDE
The EDGE GUIDE protects tile unit from contacting the ground during edging.
TAP BUTTON
The TAP BUTTON is used to advance the cutting line during operation and to
remove the spool during line replace- ment.
OPERATING INSTRUCTIONS
Use only a voltage supply as specified on your unit.
SELECT AN EXTENSION CORD
Extension Cord Gauge Chart
Length of Cord Gauge
ATTACH THE EXTENSION
CORD TO YOUR TRIMMER
Loop your extension cord through the handle and around the hook. Insure
the plug and cord are firmly and fully engaged.
25 | Ft. | (7.5 m) | 18 | Gauge |
50 | Ft. | (15 m) | 16 | Gauge |
100 Ft. (30 m) | 16 | Gauge | ||
Extension | cords are available for this | ||
unit at Sears. |
| ||
Extension |
| Cord |
|
(16 Guage) | ............ | ||
