MENTSsection)Neverusewire,. rope,string,etc.
• UsespecifiedtrimmerspoolMake. surespoolisproperlyinstalledand allpartsaresecurelyfastened.
• UseonlyCraftsman(_replacement partsandaccessoriesasrecom- mended.
CUTTINGSAFETY
_.WARNING: | Inspect area to be |
cut. Remove objects (rocks, broken glass, nails, wire, string, etc.) which can be thrown or become entangled in cutting head.
•Do not overreach or stand on unsta-
ble support. Keep firm footing and balance.
•Keep the cutting head below waist level. Do not raise handles above
your waist. Cutting head can come dangerously close to your body.
•Keep away from cutting head and spinning line.
•Use unit properly. Use only for trim- ming, scalping, and mowing. Do not force unit. It will do the job better and with less risk of injury at the rate for which it was designed.
•Use only in daylight or in good artifi- cial light.
MAINTENANCE SAFETY
_iWARNING: Disconnect unit
from the power supply before perform-
ing maintenance, or when changing trimmer line.
•Maintain unit according to recom- mended procedures. Keep cutting line at proper length. Follow instruc- tions for changing trimmer line.
•Have all service and maintenance not explained in this manual per- formed by a Sears Service Center to avoid creating a hazard.
•Never douse or squirt the unit with water or any other liquid. Clean unit and labels with a damp sponge. Keep handles dry, clean, and free from oil and grease.
•Keep the air vents clean and free of
debris to avoid overheating the mo- tor= Clean after each use.
TRANSPORTING AND STORAGE
•Stop the unit and disconnect the power source when not in use.
•Carry the unit with motor stopped.
•Store the unit so the line limiter
blade (on underside of shield) can- not cause injury.
•Store unit indoors in a high, dry place out of the reach of children. Store unit unplugged.
•Do not hang unit so that the trigger switch is depressed.
DOUBLE INSULATION
CONSTRUCTION
This unit is double insulated to help pro-
tect against electric shock. Double in- sulation construction consists of two
separate "layers" of electrical insulation instead of grounding.
Tools built with this insulation system are not intended to be grounded. No grounding means is provided on this unit, nor should a means of grounding be added to this unit. As a result, the ex- tension cord used with your unit can be plugged into any standard 120 volt elec- trical outlet.
Safety precautions must be observed when operating any electrical tool. The double insulation system only provides added protection against injury result-
ing from an internal electrical insulation failure.
,_WARNING: All electrical repairs
to this unit, including housing, switch, motor, locking sleeve assembly, wires, etc., must be diagnosed and repaired by qualified service personnel. Re- placement parts for a double insulated
appliance must be recommended by the manufacturer. A double insulated
appliance is marked with the words "double insulation" or "double insu-
lated". The symbol (square within a square) [] may also be marked on the appliance. Failure to have the unit
repaired by qualified service person- nel can cause the double insulation
construction to become ineffective and result in serious injury.
SAVE THESE INSTRUCTIONS
