5.Insertoneendofthelineabout1/2 inch(1cm)intothesmallholein- sidethespool.
6.Windthelineevenlyandtightly ontothespoolWindinthedirec.- tionofthearrowfoundonthe spool.
7.Pushthelineintothenotch,leav- ing3to5inches(7- 12cm)un- wound.
8.Insertthelineintotheexitholein thehubasshownintheillustra- tion.
9.Alignthenotchwiththelineexit hole.
10Pushthespoolintothehubuntilit.
snapsintoplace.
11Pullonthelineextendingoutside. thehubtoreleaseitfromthe notch;otherwise,unitwillnot functionproperly.
Button
Line in Notch
Hub
Spool
Line exit hole
USER REPLACEABLE SERVICE PARTS
REPLACEMENT PART
Spool with 0.065 inch Trimmer Line Assist Handle
Bolt Carriage,
Wing Nut
Shield Assembly
_WARNING: | Perform the follow- |
ing steps after each use.
•Stopthe unit and disconnect the pow- er source when not in use.
•Carry the unit with motor stopped.
•Store the unit so the line limiter blade cannot cause injury.
PART NUMBER
530403805
530403886
530016152
530404076
•Store unit and extension cord indoors
in a high, dry place out of the reach of children. Store unit unplugged.
•Store unit with all guards in place. Position unit so that any sharp object cannot accidentally cause injury.
