Craftsman 358.79474 manual Shoulder Strap Adjustment, Stop Switch, Choke Lever

SHOULDER STRAP ADJUSTMENT

1= Hold the unit as shown with the muf- fler side facing away from your body and clothes.

2= Pass the shoulder strap over your head and onto your right shoulder=

3= Extend your left arm toward the rear of the vacuum bag.

4= Adjust shoulder strap until the vac- uum bag/shoulder strap seam lies between your thumb and index fin- ger.

5= Make sure air flows freely from the elbow tube into bag. If bag is kinked, the unit will not operate properly.

KNOW YOUR BLOWER

READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR

UNIT. Compare the illustrations with your unit to familiarize yourself with the location of the various controls and adjustments= Save this manual for future reference.

Upper Vacuum Tube		Elbow Tube
	Lower Vacuum Tube
	STOP
Throttle	Switch
Trigger	Spark
	Plug
Starter	Upper	Blower Tube
		Lower Blower Tube
Rope		High-Speed
		Nozzle

Fuel Mix

Fill Cap _k

Primer

Button

Handle

STOP SWITCH

The STOP switch is used to stop the engine. To stop the engine, push and hold the STOP switch in the STOP posi- tion until the engine stops.

THROTTLE TRIGGER

The THRO]q-LE TRIGGER is used to se-

lect the desired engine speed.

PRIMER BUTTON

The PRIMER BUqq-ONremoves air from the carburetor and fuel lines and fills

them with fuel. This allows you to start the engine with fewer pulls on the starter

rope. Activate primer button by pressing it and allowing it to return to its original position.

CHOKE LEVER

The CHOKE helps to supply fuel to the engine to aid in cold starting. Activate the choke by moving the choke lever to the FULL CHOKE position. After engine attempts to start, move the choke lever to the HALF CHOKE position. Once en- gine starts, move choke lever to the RUN position.

-8-