ASSEMBLY
CARTON CONTENTS
1. | Sweeper Housing Assembly | 7. | Height Adjustment Handle | 13. Lower Hopper Tube, Rear |
2. | Bag Arm Tube (2) | 8. | Hitch Tube, R.H. | 14. Lower Hopper Tube, Side (2) |
3. | Hitch Tube, L.H. | 9. | Rope | 15. Hopper Bag Rod |
4. | Hitch Bracket | 10. Hopper Bag | 16. Hopper Support Rod (2) | |
5. | Hitch Bracket (Straight) | 11. Upper Hopper Tube, R.H. | 17. Bag Frame Strap | |
6. | Height Adjustment Strap | 12. Upper Hopper Tube, L.H. |
| |
11 |
| 12 |
|
| 13 |
|
|
| 15 |
| 14 |
|
| 2 | |
|
|
| 1 |
| 14 |
| 16 |
|
|
| |
|
| 17 | 3 |
10 |
|
| |
|
|
| |
|
|
| 6 |
|
| 2 | 7 |
|
|
| |
|
|
| 4 |
| 9 | 8 | 5 |
|
|
TOOLS REQUIRED FOR ASSEMBLY
(2)1/2" Open End or Box End Wrench
(1)Knife or Scissors
(1)Hammer
REMOVAL OF PARTS FROM CARTON
•Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations on pages 4 and 5.
ASSEMBLY OF SWEEPER
Note: Right hand (R.H.) and left hand (L.H.) are determined from the operator's position while seated on the tractor.
•Assemble the angle bracket to the sweeper housing using a 5/16" x 3/4" hex bolt and a 5/16" hex lock nut. Make sure the bracket is turned as shown and aligned straight with the housing and then tighten See fi gure 1.
5/16" HEX LOCKNUT
ANGLE
BRACKET
5/16" x 3/4"
HEX BOLT
FIGURE 1
4
