STEP 16 - ATTACH BAG BOTTOM

•Insert the bag frame strap into the stitched sleeve at the front edge of the bag bottom. See figure 14.

BAG FRAME STRAPSTITCHEDSLEEVE

FIGURE 14

•Assemble the bag frame strap to the holes in the lower hopper tubes using two clevis pins (O) and hair cotter pins (S). See figure 15.

BAG FRAME STRAP

HAIR COTTER PIN (S)CLEVIS PIN (O)

FIGURE 15

•Fold the bag flaps around the lower hopper tubes and attach to the bag bottom using the snaps. See figure 16.

SNAP FLAP

FIGURE 16

STEP 17 - ASSEMBLE HOPPER CLAMPS

•Assemble two hopper mount clamps (T) over the hole in the middle of each upper hopper tube using two carriage bolts (F) and two nylock nuts (I). Tighten only finger tight. See figure 17.

5/16" x 3/4"

5/16" NYLOCK

CARRIAGE

NUT (I)

BOLT (F)

 

HOPPER

MOUNT

CLAMP (T)

UPPER

HOPPER

TUBE

FIGURE 17

9