•Assemble the (RH) and (LH) hitch tubes to the control tube using two 1/4" x
•Assemble the plastic caps onto the ends of the hitch tubes and control tube as shown in figure 5.
F
F
F
D
B
FIGURE 5
•Attach the (RH) and (LH) hitch tubes to the frame tube using four 1/4" x 2" hexbolts (C) and 1/4" nylock nuts
(D). Tighten. See figure 6.
•Assemble the Control Cable to the Hitch Control Tube using the carriage bolt and nylon wing nut. Tighten. See figure 7.
FIGURE 7
•Assemble the Hitch Brackets to the Hitch Control Tube using two 1/4" x
•Assemble the hitch pin (H) through the hitch brackets and secure with the 1/8" hair cotter pin (E). See figure 8.
D
B
C
H
| D |
|
FIGURE 6 | D | E |
|
FIGURE 8
5