TOOLS REQUIRED FOR ASSEMBLY

(2)7/16" Wrenches

(2)1/2" Wrenches

(2)3/4" or Adjustable Wrenches

(1)Screwdriver

(1)Pliers

•Assemble the grip onto the lift handle. See figure 2.

•On the right side, insert a 5/16" x 1-3/4" hex bolt through a 5/16" flat washer and then through the rear hole in the hopper and the hitch tube. Assemble the transport tube and then the lift handle onto the bolt and secure with a 5/16" nylock hex nut. Do not tighten yet. See figure 2.

•Assemble a 5/16" x 1" hex bolt and 5/16" nylock hex nut to the bottom hole in the transport tube assembly and the lift handle. Do not tighten yet. See figure 2.

•Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify using the illustrations on pages 3 and 4.

•Attach a hitch tube to the front hole in the right hand side of the hopper using a 5/16" x 1-1/2" hex bolt, a 5/16" flat washer and a 5/16" nylock hex nut.

Assemble the bolt and washer from inside the hopper. Do not tighten yet. See figure 1.

•Repeat on the left hand side of the hopper.

5/16" 1-1/2"

5/16" FLAT HEX BOLT WASHER

LIFT GRIP HANDLE

5/16" x 1"

HEX BOLT

5/16"FLAT

WASHER

5/16" x 1-3/4"

HEX BOLT

HITCH TUBE

5/16" NYLOCK HEX NUT

FIGURE 1

5/16" NYLOCK TRANSPORT TUBE HEX NUT

FIGURE 2

•On the left side, insert a 5/16" x 1-3/4" hex bolt through a 5/16" flat washer and then through the rear hole in the hopper and the hitch tube. Assemble the transport tube onto the bolt and secure it with a 5/16" nylock hex nut. Do not tighten yet. See figure 3.

5/16" x 1-3/4"

HEX BOLT

5/16"FLAT

WASHER 5/16" NYLOCK

HEX NUT

FIGURE 3

6