iNSTRUCTiONS FOR SINGLE SUSPENSION BRACKET TRACTORS
STEP 1: (SEE FIGURE 2)
*Open parts bag labelled "A" and verify that all parts are present.
NOTE: Place cardboard or a mat on work surface to prevent scratching of parts removed from carton and tractor.
HARDWARE SHOWN FULL SiZE
EXCEPT WHERE NOTED
STEP 2: (SEE FIGURE 3)
•Remove tractor hood. (Refer to tractor manual.) Remove the browning shield as shown.
STEP 3: (SEE FIGURE 4)
Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for remaining plugs.
STEP 4: (SEE FIGURE 5)
Place a washer onto a carriage bolt and then insert the bolt into the second mounting hole from the front
of the tractor frame. Securely tighten a whizlock nut onto the bolt on the outside of the tractor frame.
Repeat on other side of tractor.
(not full size)
PARTS BAG "A"
FIGURE 2
Ref. Part Qty. Description
A43350 4 Carriage Bolt,
B44072 4 Whizlock Nut, 3/8"
CR19171616 4 Washer, 1/2"xl"
D47674 4 Plug
66460 1 Bumper
REMOVE
FRONT SCREWS
REMOVE
BROWNING SHIELD
FIGURE 3
BUMPER
PUSH DOWN
WiTH EVEN
PRESSURE
WORK BENCH
OR SOLID TABLE
I
CARRIAGE BOLT
AND WASHER
\
WHIZLOCK
NUT
FIGURE 5
Call | 3 |
DO NOT RETURN TO STORE |
|