STEP 5: (SEE FIGURE 6)
*Spread ends of bumper enough to fit slots onto bolts in rear mounting holes in tractor frame.
*The bumper has three mounting holes. The rear holes provide the most clearance while the forward holes provide a neater appearance. Use a hole that provides enough clearance for the hood to stay in raised position when opened. Place a washer onto a carriage bolt and insert the bolt through the tractor frame and into desired mounting hole on each side of bumper. Secure with a whizlock nut.
iMPORTANT: Before fully tightening nuts, be sure tractor hood will stay in raised position when opened.
STEP 6: (SEE FIGURE 7)
*Replace the browning shield using the front screws you removed in Step 2.
CARRIAGE BOLT
AND WASHER
WHIZLOCK NUT FIGURE 6
REPLACE
FRONT SCREWS
REPLACE
BROWNING SHIELD FIGURE 7
4 | Call |
| DO NOT RETURN TO STORE |