STEP 3: (SEE FIGURE 4)
*Place plug on a work bench or solid table and push end of bumper down onto plug. Repeat for remaining plugs.
STEP 4: (SEE FIGURE 5)
*Remove any bolts present in front mounting holes in side of tractor frame. If bolt will not screw out of hole, check if a nut is present on bolt on inside of frame.
On GT tractors, if access to nut is blocked by a front mounted muffler, slide muffler down exhaust tubes to rest on top of browning shield.
iMPORTANT: Be sure to
•If rear mounting holes in tractor frame are empty, install hex bolts and whizlock nuts supplied in the parts bags. See figure 5.
BUMPER |
|
|
PUSH DOWN |
|
|
WITH EVEN |
|
|
PRESSURE |
|
|
WORK BENCH | SHORT | STEP |
OR SOLID TABLE ,_'_ | PLUG (E) | |
I | FIGURE4 | |
(LT) LAWN TRACTOR |
| |
REMOVE BOLT | iNSTALL (C), (D) IF | |
iF PRESENT | HOLE iS EMPTY |
SUSPENSION BRACKET /
(LT) LAWN TRACTOR
REMOVE BOLT | INSTALL (C), (D) IF |
IF PRESENT | HOLE IS EMPTY |
SUSPENSION
BRACKET
(GT) GARDEN TRACTOR
EXHAUSTTUBES
MUFFLER |
|
|
|
| \/ |
BROWNING SHIELD | / | REMOVE BOLT |
SUSPENSION BRACKET |
| IF PRESENT |
|
| FIGURE 5 |
6 | Call |
| DO NOT RETURN TO STORE |