Flipthecartoversothatit restsonitswheels.

Assemble the front tongue on top of the rear tongue

using three 3/8" x 3" hex bolts and 3/8" nylock nuts. See figure 8.

HINT: For easier assembly, support the rear tongue with a block of wood.

 

3/8" x 3"

 

HEX BOLT

 

%

 

TONGUE

%

(FRONT)

 

 

/

\

318"NYLOCK NUT

BLOCK

 

FIGURE 8

Assemble the hitch bracket to the front tongue using two 3/8" x 1-1/4" hex bolts and 3/8" nylock nuts. Tighten. See figure 9.

Secure the hitch pin to the hitch bracket and tongue with the hair cotter pin. See figure 9.

HAIR

COTTER

rPIN

318"NYLOCK NUT

TONGUE

FIGURE 9

ASSEMBLING VAC PARTS

Release the latch lock lever and tilt the cart bed back. See figure 10.

Assemble the front panel to the cart bed, sliding the bottom lip of the panel in between the cart bed and the latch stand bracket. Fasten the panel to the bottom and sides of the cart bed using six 1/4" x 5/8" hex bolts and 1/4" nylock nuts. Tighten. See figure 10.

Tighten the two bolts that you assembled to the latch stand bracket in figure 5.

FRONT

\

PANEL

\

114"NYLOCK NUT

 

\\

 

\

 

1/4" x 5/8"

 

HEX BOLT

1/4" x 5/8"

 

HEX BOLT

 

LATCH

STAND

BRACKET

FIGURE 10

10Cal11-866-576-8388formissingpartsorassemblyhelp

DO NOT RETURN TO STORE

Page 10
Image 10
Craftsman 486.24717 manual Assembling VAC Parts