Craftsman 536.7975 manual Esponsi, Ilities, Schedule, Service Dates, General Recommendations

			ESPONSI			ILITIES
						, ,,,,,,,,,,,, ,,,
			SCHEDULE			SERVICE DATES
Fill in dates as you com-					xz ,x
	Before After		Every	Every Before	Before
plete regular service
	Each	first 2	25	75 Storage	Each
	Use	Hours	Hours Hours		Season

i,,inu m i== =

Tighten All Screws and Nuts

Lubricate Transmission

Lubricale Tine Shaft

Clean and Re-Oii Air Cleaner Fifter

Check Spark Plug 11

Cyfinder Exhaust Ports

Drain Fuel

GENERAL RECOMMENDATIONS

The warranty on this mini tiller/cultivator does not cover items that have been subjected to operator abuse or negligence To receive full value from the warranty, the operator must maintain the mini tiller/cultivator as in- structed in this manual. The following Service Recom- mendations Chart is provided to assist the operator in properly maintaining the mini tiller/cultivator

LUBRiCATiON

Every 25 hours and/or at the beginning of each season, the gear box should be filled with lubricant, Tubesofgear lubricant are available from most automotive supply stores Use portable tool grease such as Lubriplate 630AA (Product No 06787-1-3/4 oz tube) or Lubriplate GR-132 (Product No 15892-10 oz tube), The tine shaft should have oil applied before storage and after clean- ing, if the mini tiller/cultivator is flushed with water The following illustration is provided to assist the operator in properly maintaining the mini tiller/cultivator

i .

v"

11

v"

OCheck the condition of the felt washer in the side of lhe

transmission at lhe line shaft (see Fig 9) Replace the felt washer if it is damaged (see Repair Parts section in this manual)

TRANSMISSION
FELT	WASHER
AIR VENT SCREW
	TINE SHAFT
		line
	before
	storage	and
	after
	cleaning,		if
	the mini		titler/
	cultivator		ts
GREASE	flushed	with
FITTING	iter)

(Lubricate the gear box with

lubdplate 630AA or

Lubrlplate GR-132

VIEW OF LEFT SIDE WITH TINES REMOVED

i,,u,mH

TO COOL BEFORE FILLING WITH CAUTION: ALLOW THE TRANSMISSION

GREASE,

@Remove both left side tines (see Adjustments/ Re- pairs section) in this manual..

ORemove the air vent screw (see Fig 9) fromthe top left side of the transmission.

OUsing a grease gun, fill the transmission through the

grease fitting until the new grease begins to come out of the air vent screw hole

O Reinstallthe air vent screw.

FIG,. 9

OClean line shaft, spread a few drops of oil on shalt in tine replacement areas Reinstall the tines

ORemove the right side tines Checkthefeltwasherfor damage, clean and oil the tine shaft Reinstall the tines.

13