_ |
1- Screw,
Parts packed separately in carton (not shown full size)
1Stabilizer- container Fuel
2 - Ignition Keys
(Attached to engine in plastic bag)
1 - Crank Assembly
1 - container 5W30 oil
1 - Snow Chute Assembly
CAUTION: Always wear safety glasses or eye shields while assembling snow thrower.
TOOLS REQUIRED FOR ASSEMBLY 1 - Knife to cut carton and plastic ties 2 - 1/2 inch wrenches (or adjustable
wrenches)
2 - 9/16 inch wrenches (or adjustable wrenches)
2 - 3/4 inch wrenches (or adjustable wrenches)
t- Pliers (to spread cotter pin)
1 - Screwddver
1 - Measuring tape or ruler
The figure below shows the snow thrower in the shipping carton.
The figure below shows the snow thrower completely assembled.
References to the right or left hand side
of the snow thrower are from the viewpoint of the operator's position behind the unit.
Auger drive lever
cable
ly
lever
Lower hand!
=_ Clutch
able
Height adjust
skids
e /
assembly
5
