HOW TO REPLACE
THE AUGER SHEAR BOLT The augers are secured to the auger shaft with special shear bolts. These shear bolts are designed to break and protectthe machine if an object be- comes lodged in the auger housing. Do not use a harder bolt as the protection provided by the shear bolt will be lost.
protect the machine, use
AARNING: For safety and to only original equipment
shear bolts.
To replace a broken shear bolt, proceed as follows. Extra shear bolts were pro- vided with the unit.
1.Stop the engine. Disengage all con- trois.
2.Disconnectthe spark plug wire. Make sure all movingparts have stopped.
3.Align the hole in the auger with the hole in the auger shaft. Install the new shear pin and spacer. See Figure 45.
4.Connect the spark plugwire.
/,
Shear Pin
Spacer
J | Figure 45 |
32
