O-RING MAINTENANCE
Through the normal operation of your pressure washer, O-Rin_, which keep the connections of the hoses and
gun tight and leak-free may become worn or damaged.
Provided with your pressurewasher is an O-Ring Maintenance Kit which provides replacement O-Rings, Rubber Washer and Quick Connect filter.
Parts in the O-Ring Kit Include:
•1 O-Ring (p/n97837) for the end of the spray gun connection between gun and high/low spray wand.
1 O-Ring (p/n B2386) for the outside of the Male
Quick-Connect.
O
•1 Water Inlet Screen (pin B2384) for the Female
Quick-_onnect.
•2 O-Rings (pin B2264) for the ends of the high pres- sure hose.
To remove a worn or damaged O-Ring:
• Use a small flathead screwdriverto get undemeath the O-Ring and pry it off.
Note: The above two O-Rings are close in size. Please match carefully to assure properO-Ring usage.
•1 Rubber Washer (pin B2385) for the inside of the
Male Quick-Connect.
