• Cut the tie wraps on the high pressurehose and | • Place assembled spray gun on holder. |
connect high pressure hose to gun. Tightenby |
|
hand. |
|
CHECKLIST
•Remove plastic cap and connect high pressure
hose to pump. Tighten by hand. | Before you operate your new high pressure washer | ||
__ | _ | _ | please review the following checklist: |
_/ |
|
| The high pressure hose connections to the spray |
|
| _ All assembly instructionshave been completed. | |
|
| gun and to the pump are tight and secure. | |
b _ |
| _ | While learning how to use your high pressure |
|
| 1 | (_ washer, pay extra attention to the following important |
|
|
| items: |
• Engine oil is at proper level
Important: Any attempt to crank or start the engine before it has been properly serviced with the recom- mended oil may result in an engine failure. See Page 8 for instructionson adding oil and proper oil specifi- cations.
Important: The water supply to your pressure wash- er must be connected and tumed on priorto starting your engine.
•Attach nozzle extension to spray gun.
• Be sure gas tank is filled properlywith clean, fresh, unleaded gasoline.
• Become familiar with all controls- their location and function. Operate those controlsbefore start-
ing the engine.
5
._
