11
SMOOTH CE 7.4E ELLIPTICAL TRAINER
ASSEMBLY
STEP 1:
Remove the upper frame and lower frame of Elliptical Trainer from the carton as shown in FIG.1 and FIG.2.
First connect the Wire Harness - Lower (110) and Wire Harness – Middle (118) as shown in FIG.5.
Slide the Side Upright – Left (5) and Side Upright – Right (6) into the Base Frame (99) and secure by tightening the two Bolts as shown in FIG 4. The two Bolts are
Secure the Upright (42) to the Base Frame (99) using two M8 x 65mm Bolts (78), two 8mm Curve Washers (91) and two M8 Cap Nuts (98) as shown in FIG 3.
NOTE: Make sure the wire is recessed into the frame, do not trap the wire.
Fig 1 | Fig 2 |
98 | 98 |
91 | 91 |
6
42 | 5 | |
118 | ||
|
99 | 42 |
|
| 110 | |
78 Fig 3 |
| |
|
| |
| 98 |
|
| 91 | Fig 5 |
6
78
99
C99
Fig 4
www.smoothfitness.co.uk
