Smooth Fitness CE 7.4E Fig 10, Fig 9, Fig 8

SMOOTH CE 7.4E ELLIPTICAL TRAINER

www.smoothfitness.co.uk

ASSEMBLY

STEP 5:

Connect the Hand Pulse Sensor Wire – Upper (117) and Hand Pulse Sensor Wire – Middle (9) as shown in FIG.10.

Attach the Handrail – Right (8) to Side Upright – Right (6) and secure using two M8 x 45mm Allen Head Bolts (59) as shown

in FIG.8. Then secure the Handrail – Left (7) to the Handrail – Right (8) with one M8 x 15mm Bolt (74) as shown in FIG.9.

NOTE:

Make sure the wire is recessed into the Upright, do not trap or pinch the wire.

117

Fig 10Fig 9Fig 8

Contents

Main PRECAUTIONS POWER REQUIREMENTS PREASSEMBLY HARDWARE COMPARISON CHART ABC 8 4 7 HARDWARE COMPARISON CHART Page Page SMOOTH CE 7.4E ELLIPTICAL TRAINER www.smoothfitness.co.uk PARTS DIAGRAM A MAJORITY OF THE PARTS SHOWN HERE HAVE BEEN PREASSEMBLED AT THE FACTORY. Page Page C 30 34 17 88 A B FIG. 6 Page Make sure all wires are recessed into the Upright, do not trap or pinch any of the wires. Fig 7 Make sure the wire is recessed into the Upright, do not trap or pinch the wire. Fig 10 Fig 9 Fig 8 Page Fig 15 Fig 16 Page LEVEL ADJUSTMENT LEVEL ADJUSTMENT TRANSPORT INSTRUCTION Page Page Page Page Page Page Page Page Page WARRANTY IMPORTANT STEPS TARGET HEART RATE MUSCLE CHART Abdominal muscles Page STRETCHING ROUTINE