SECTION 2: SETUP
UnpackingInventory
Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover any damage, please call us immediately at (570)
Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.
When you are completely satisfied with the condi- tion of your shipment, inventory the contents.
SUFFOCATION HAZARD!
Keep children and pets away from plastic bags or packing materials shipped with this machine. Discard immediately.
Needed for Setup
The following are needed to complete the setup process, but are not included with your machine.
Description | Qty | |
• | Cleaner/Degreaser (Page 8) | As Needed |
• | Disposable Shop Rags | As Needed |
• | sturdy Workbench | 1 |
• Vise Secured to Workbench | 1 | |
• | Wrench 17mm | 1 |
• | hex Wrench 2.5mm | 1 |
• | hex Wrench 6mm | 1 |
Model T10726 (Mfg. Since 12/12)
The following is a description of the main compo- nents shipped with your machine. Lay the compo- nents out to inventory them.
If any
Shipping Inventory: (Figure 1) | Qty | |
A. Brake Assembly | 1 | |
B. | Operating lever w/Set Screw | 1 |
C. | Lever Shaft | 1 |
A
B
C
Figure 1. Shipping inventory.
NOTICE
If you cannot find an item on this list, care- fully check the machine and the packaging materials. Some of these items may be pre- installed for shipping or become misplaced during unpacking.
