CARTON CONTENTS
The following parts are shippedloose with your pressure washer:.
*Main Unit
•High Pressure Hose
•Manual Bag (which includesthe items listed below)
•Ov_er'sManual
*Nozzle Cleaner Kit
•Parts Box (which includes items listed below)
• Spray Gun
•Wand Extensionwith Hi/Lo Adjustable Nozzle.
•Wire Form
•Motor Oil
•
Become familiar with each piece before assembling the pressure washer. Check all contentsagainst the illustra- tion on Page 6. If any parts are missing or damaged, call the Pressure Washer Helpline at
HOW TO SET UP YOUR PRESSURE WASHER
Forthe most part, yourCraftsman High PressureWasher has been assembledatthe faclonj. You must, however, attachthe wire form, assemble the spray gun, and attach the high pressurehose to the pump and spray gurL
•While facing the rear of the Pre_;sureWasher, insert the wire supportwith the longer arm positk)nedon the left. From this view the hook should resemble a =,r'.
TO REMOVE PRESSURE WASHER FROM
CARTON
Removeloose parts and parts box included with pres- sure washer. The high pressure hose is packed in the bottom of the carton on the guide handle end.
Remove the hose.
• Slice two comers at guide handle end of carton from | • Cut _ wrap on chemicalinjecliontube. Remove chami- | |
top to bottom so the panel can be folded down fiat, | cal injectionfilter,threadchemicalinjectiontube through | |
then remove all packing material. |
| the wireform and reinsertIilter intotube. |
• Raise guide handle, secure in place and 'rollthe pres- |
| |
sure washer out the open end of the carton. |
| |
Loosen | knobs |
|
to raise | handle |
|
Tighten knobs when handle is
straight.
•Check carton for additionalloose parts.
4
