O-RING MAINTENANCE | 1 O-Ring (p/n B2386) for the outside of the Male |
Through the normal operation of your pressure washer, | Quick-Connect, |
|
O-Rings,which keep the connections of the hoses and | |
gun tight and leak-free may become worn or damaged. | 0 |
Provided with your pressure washer is an O-Ring |
Maintenance Kit which provides replacement O-Rings, |
Rubber Washer and Quick Connect filter. |
Parts in the O-Ring Kit Include: |
- 2 O-Rings (pin 97837) for each end of the nozzle |
extension, | |
• | 1 Water Inlet Screen (p/n 132384)for the Female |
| Quick-Connect, |
=2 O-Rings (pin B2264) for the ends of the high pres- sure hose.
1 o-ring (p!n B2688) for the connection end of the .....
rotating brush.
/O-Ring
Note: The above two O-Rings are close in size. Please match carefully to assure proper O-Ring usage.
. 1 Rubber Washer (pin B2385) for the inside of the Male Quick-Connect.
To remove a worn or damaged O-Ring:
o Use a small flathead screwdriver to get underneath the O-Ring and pry it off.
