CARTON CONTENTS
The following parts are shipped loose with your pressure washer:
•Main Unit
•Manual Bag that includes Nozzle Cleaner Kit
•Parts Box (which includes the following items)
•Spray Gun
°Wand Extension with
• Product Introduction Video
• Motor Oil
°High Pressure Hose
°Bag of fasteners (see page 3 for illustrations)
Become familiar with each piece before assembling the pressure washer. Check all contents against the illustra- tion on Page 6. if any parts are missing or damaged, call the Pressur.e Washer Helpline at
TOOLS REQUIRED FOR ASSEMBLY
2 adjustable wrenches OR the following wrenches:
°5/16" (8mm) wrench
• 1/2" (13mm) wrench
•Two 7/8" (23ram) wrench
your pressure washer for operation, however, you will need to perform the following tasks:
°Attach wire basket to topside of guide handle with (4) #10
SCREWS
Attach guide handle assembly to frame using a 1/2" wrench.
HE N__
REMOVE PRESSURE WASHER FROM CARTON
oRemove the parts box.
°Slice two corners at rear of carton (opposite end of
tires) from top to bottom so one panel can be folded down flat.
-Remove the wire basket and
•Remove the unit by rolling it out the opening in the carton.
Refer to "Carton Contents," included with your pressure washer. Become familiar with each piece before assem-
bling the pressure washer. Check all contents against the list on this page. If any parts are missing or damaged, call the Pressure Washer Helpline at
PREPARING THE PRESSURE WASHER FOR FIRST USE
IF YOU HAVE ANY PROBLEMS WITH THE ASSEMBLY
OF YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLtNE AT
Note: Included with your pressure washer is a video cas- sette that demonstrates how to set up your pressure wash- er. If you have a video cassette recorder (VCR), you may want to view the video before assembling your unit.
For the most part, your Sears Craftsman High Pressure Washer has been assembled at the factory. To prepare
FLAT WASHER "_-_...
CAPSCREW ,J_ .i
°Uncoil the high pressure hose and attach the threaded end with the teflon tape to the spray gun.
°Connect high pressure hose to gun with two 7/8" wrenches.