HOW TO USE YOUR PRESSURE WASHER
IF YOU HAVE ANY PROBLEMS OPERATING
YOUR PRESSURE WASHER, PLEASE CALL THE PRESSURE WASHER HELPLfNE AT
HOW TO ADJUST PRESSURE AND SPRAY
PATTERN
WARNING: Never adjust spray patterm when spraying. Never put hands in front of spray nozzle to adjust spray pat- tern. You could be injured.
On the end of your spray gun is a nozzle that you can slide forward and backward and that you can also twist from side to side. With the adjustable nozzle you can adjust the spray pattern to be either high pres- sure or low pressure. You can also adjust the spray so it is concentrated in a stream pattern or expanded into a fan pattern.
•Located on the front of the pump is the pressure control knob. You can increase the pressure by turning the knob clockwise.
•Twisting the nozzle adjusts the spray pattern from a stream pattern to a fan pattern.
y
TWIST NOZZLE FOR FAN | TWIST NOZZLE TO NAR- |
PATTERN | ROW SPRAY PATTERN |
•For most effective cleaning, keep spray nozzle between 8 to 24 inches of cleaning surface.
If you get the spray nozzle too close, especially using high pressure mode, you may damage the cleaning surface.
APPLYING DETERGENT WITH ADJUSTABLE NOZZLE
•Slide the nozzle forward when you wish tOadjust the spray to low pressure mode. Slide the nozzle backward to achieve high pressure.
f
IMPORTANT: Use soaps designed specifically for pressure washers. Household detergents could dam- age the pump.
IMPORTANT: You must attach all hoses before you start the engine. Starting the engine without al! the hoses connected will damage the pump.
To apply detergent follow these steps:
•Prepare the detergent solution as required by your iob,
•Place the detergent solution the wire basket a_ached to the guide handle.
NoZzLE IN HIGH SLIDE NOZZLE FORWARD FOR
PRESSURE MODE LOW PRESSURE MODE AND DETERGENT APPLICATION
