,Remove the plastic cap from the high pressure out- let. Feed the high pressure hose through the hose guide and then connect the hose to the outlet.
HOSE GUIDE
•Connect nozzle extensk)n to spray gun.
•Place assembled spray gun on holder.
CHECKLIST
Before you operate your new high pressure washer, to be sure you receive the best performanceand sat- isfaction from this quality product, please review the following checklist:
°All assembly instructionshave been completed.
° The high pressure hose connections to the spray gun and to the pump are tight and secure.
While learning how to use your high pressure
washer, pay extra attention tothe foil0wing important items:
• Engine oil is at proper level
• Be sure gas tank is filled properly with clean, fresh, unleaded gasoline.
, Become familiar with all controls - their location and function. Operate those controls before start- ing the engine.
the engine before it has been properly I serviced with the recommended oil may I
result in an engine failure. See Pages 8 I
I CAUTION: Any'attempt to crank or start } and 9 for instructions on adding oil and
proper oil specifications, | I |
ASSEMBLY PARTS PACKED IN MANUAL BAG SHOWN FULL SIZE
(4) Flat Washers
(4) #10
IlJI1EtIIIiIlIJtlliIi!Viiiiiii]li
(4) Hex Head Capscrews - M8 x 50ram | (4) Lock Washers | (4) Hex Nuts |
|