Rosewill RSL-112 user manual ·Problem Solving, ·Safety Guide, 10·Technical Data

PIR Solar Spotlight/PIR Solaire Lumière RSL-112 User Manual

8·Problem Solving

*Make sure the switch is “on”. *Make sure the panel is not broken.

*Make sure the panel is installed in places free from shadow

*Make sure the panel is not polluted by dirt. If have, please clean it with water by soft cloth. Do not use solvents. Take extreme care not to scratch the clear cover.

9·Safety Guide

*The solar light is waterproof on normal conditions, but please make sure it is not always exposed to a lot of water, or installed in some moist places, like bathroom.

*Make sure hands are not wet when replacing the batteries.

*Make sure not to reconstruct the solar light by yourself, to avoid any possible malfunction, fire or electronic shock.

*Make sure the solar light is not installed where the temperature is too high.

*Please notice that the Ni-MH batteries recharging capacity might decline under extreme low temperature.

*The LED inside can not be replaced.

10·Technical Data

LED : Nichia 1pc 1watt power LED

Battery : 3pcs 900mAh Ni-MH batteries

Sensor : PIR sensor

Sense Range : about 6m*90°

Light duration per sense : 40 seconds

Material : plastic

Wire length : about 5m

Thank you for purchasing a quality Rosewill Product.

Please register your product at : www.rosewill.com for complete warranty information and future support for your product.

4