PIR Solar Spotlight/PIR Solaire Lumière | User Manual | |
|
|
|
|
|
|
1·Solar light parts
solar light head | ④battery back cover | ⑦plug |
|
| |
|
| |
| ⑤solar panel | |
①solar light body |
|
|
③PIR sensor | ⑥panel base | |
⑾screw
⑩socket | ⑿on/off switch |
⑧screw*6
⑨bulged tube*6
2·Battery Charge
In normal condition, the batteries inside the solar light are fully charged. You can use the light directly. If not, please fully charge the batteries before using: turn the switch “on” for sunny daytime and turn it “off” when darkness comes. Repeating for 2 days (about 16 hours), the batteries would be fully charged.
3·Solar Light Body Installation
1/ loose the screws and remove the battery back cover from the light
2/ drill 4 holes on the wall based on the four tubes in the battery back cover, insert the bulged tubes in the holes, and fix the battery back cover with screws.
3/ slip the solar light body up to down until the | 4/ adjust the angle of light head & PIR sensor |
hasp inside is connected, fix the body with |
|
screws. |
|
1
