Craftsman 580.76804 manual O-RingMaintenance

Insert wire into nozzle and turn back

and forth to clear obstruction.

Remove additional debris by back flushing water supply through wand. Back flush between 30 to 60 seconds. Turn wand to stream spray and move nozzle from low to high pressure while flushing.

.

•Reinstall nozzle into wand. DO NOT overtighten.

•Reconnect wand extension to spray gun.

•Reconnect the water supply, turn ON the water, and start the engine.

•Test the cleaning System by-opefafin_'with"nozzle in the high and the low pressure positions.

O-Ring Maintenance

Through the normal operation of your cleaning system, the o-rings keep the connections of the hoses and gun tight and leak-free. They may become wom or damaged with use. Provided with your cleaning system is an O-Ring Maintenance Kit containing replacement o-rings, a rubber washer and a garden hose inlet screen.

Parts in the O-Ring Kit Include:

•1 O-ring, red, (p/n B2726) for the end of the spray

gun connection between gun and higWIow spray wand.

•2 O-rings, yellow, (pin B2264) for the ends of the high pressure hose.

Please match carefully to assure proper o-ring usage.

Note:gardenThe abovehose connectortwo -rings. are close in size.

i 1 rubber washer (p/n B2385) for the inside of the 1 water inlet screen (p/n B2384) for the garden hose connector.

To remove a worn or damaged O-Ring:

•Use a small flathead screwdriver to get underneath the o-ring and pry it off.

12