Craftsman 580.76804 manual System, Siphoning, Tips, Ow To Stop Your Cleaning

Engage the safety latch on the spray gun.

Attach adjustable nozzle extension onto spray gun.

Move choke lever to "CHOKE" position.

\

Note: If restarting a warm engine after e short shutdown, move choke lever to "RUN."

•Move engine control to =ON."

Note: The Pressure Command TM may be placed in any position dudng starting or operation.

control from one position to the next until it is in the "Run'position.

Disengage the spray gun safety latch.

i hen the engine starts, gradually move the choke

OW TO STOP YOUR CLEANING

SYSTEM

Move the engine control switch to the "OFF"

position.

\

•Turn fuel shut-off valve to "ON" position.

OFF

•Grasp starter handle and pull slowly until you feel some resistance. T_en pull cord rapidly to overcome compression, prevent kickback and start the engine. Let rope retum to starter slowly.

Note: If after 3 pulls the engine fails to start, disengage the spray gun safety latch, squeeze the tdgger to relive water pressure, re-engage the spray gun safety latch, move the choke control to the "Run" position and pull the recoil starter handle rapidly (three pulls maximum).

•Tum fuel shut-off valve to "OFF" position.

•Simply shutting off the engine will not release pressure in the system. Squeeze tdgger on the spray gun to relieve pressure in the hose.

Note: A small amount of water will squirt out when you release the pressure.

•Rotate the Dial-A-Cleaner TM selector knob to the "OFF" position to prevent chemical leakage.

SIPHONING

DO NOT siphon standing water for your water supply.

Contaminated, brackish or dirty water can damage the pump. Connect only to household water supply.

TIPS

Never use the garden hose inlet to siphon detergent or wax.

If you hold the spray nozzle too far away from the object being cleaned, washing will not be as effective.

Always store the cleaning system with the Dial-A- Cleaner TM selector knob to the =OFF" position.

9