3.Chargeforatleast1hour.
4.TheLEDwillglowredwhenthe batteryischargingandgreenwhen itisreadytouse.IftheLEDdoesnot illuminatewhenthehandleisplacedin thechargerack,checktomakesure thatthereispropercontactbetween thehandleandthechargerbase.
5.Asecondchargingbayisprovided onthechargeracktochargesecond battery(notincluded)Tocharge. batteryinthisbay,insertthebattery untilitlocksinplaceandtheLED illuminates(seefigure2)TheLED. willglowredwhenthebatteryis chargingandgreenwhenitisready touseWhenchargingtwobatteries. (oneinthehandleandonedirectlyin thecharger),thechargerwillcharge whicheverbatterywasinserted first.Thenwhenthatbatteryisfully charged,itwillautomaticallyswitch andchargetheotherbatteryEach. batterywilttakeapproximately1hour tocharge(atotalof2hoursfortwo batteries).
Figure 2
thechargetoeachbatteryandshuts ofthechargewhencompleteThe. batteriescanbeleftinthecharger
Longestlifeandbestperformancewilt beobtainedwhenchargingatnormal roomtemperature.
Batterylifeisdependentonusage,
storagetemperatureandtime.
CONNECTINGTOOL ATTACHMENT
TO THE POWER HANDLE
Be sure to follow the following safety precautions when attaching and detaching tools from the power handle.
Remove the battery from the handle before attaching or detaching tools.
Never touch the control switches on the power handle when attaching and detaching tools
To attach a toot:
1.Twist the lock ring on the power handle to the unlocked position. (see figure 3)
Figure 3
Charging Notes:
CAUTION: The charger can only be used with 60 cycle,
The charger unit plugged into the AC outlet wilt normally become warm to the touch during charging.
The charger automatically controls
2.Insert the male end of the power handle interface into the female socket in the end of the tool attachment making sure that it is firmly seated. (see figure 4) The interface is keyed so that it will only go together one way. The handle and tool should go together easily. If you experience resistance in putting them together,
