Seeinstructionshowtoattachline
guardintheOperationsectionofthe linetrimmermanualFailuretoattach.
thelineguardmayposeariskof injury,maycausemotordamageand willvoidthewarranty.
READANDFOLLOWALLSAFETY
WARNINGprintedthevarioustool attachmentmanuals.
Toreduceriskwhenhandlingthe battery:
DONOTdisposeofthebatteryina fire.ThecellsmayexplodeCheck. withlocalcodeforpossiblespecial disposalinstructions.
DONOTopenormutilatethebattery. Releasedelectrolyteiscorrosiveand maycausedamagetotheeyesor skin.Itmaybetoxicifswallowed.
EXERCISECAREinhandling batteriesinordernottoshortthe
batterywithconductingmaterials
suchasrings,braceletsandkeysThe. batteryorconductormayoverheat andcauseburns.
Toreduceriskwhenusingcharger:
DONOTusechargeroutdoorsin wetconditions;useinsideonly.
DONOTchargetheunitwhenthe temperatureisbelow+40Forabove +120F.Itmaylessentheservicelife ofthebattery.
Thisunitanditschargeraredesigned toworktogetherDONOTchargethe. batterywithanyotherchargerandDO NOTusethischargerwithanyother yardtoolorbattery.
Thechargerisdesignedtooperateon 120voltsDONOTattempttouseitat.
anyothervoltage. Storetheseinstructionsbyfoldingin
halfandslidingintotheslotintheback ofthewaltchargingrack.
SAVE THESE INSTRUCTIONS
e" =_ ®
CHARGE BATTERY PRIOR TO USE - The battery does not come fully charged when purchased. Before using the unit, the battery must be charged. Before charging the battery, read safety and charging instructions.
PROPER RUN TIME AND PERFORMANCE can only be obtained with a fully charged battery.
CHARGE TIME - Charging for approximately 1 hour is sufficient to replenish the battery to a full charge. Initial use, long periods of inactivity, or storage at extreme temperatures may require extended charge time.
WALL CHARGE BRACKET - Before charging the unit, make sure the charge bracket is securely attached to the walt; attach with screws to a wall stud. The use of wall board anchors is NOT recommended.
To Charge Battery:
1.Plug the charger into a 120 Volt AC outlet.
2.Place the Power Handle with
battery attached into the wall charge bracket. It is not necessary to remove the tool attachment when charging the battery. (see figure 1)
Figure 1
