,_kCAUTION: Before performing any service or adjustments: o Depress clutch/brake pedal fully and set parking brake.
,Place gearshift lever in neutral (N) position.
°Place attachment clutch in "DISENGAGED" position. o Turn ignition key "OFF" and remove key.
o Make sure the blades and all moving parts have completely stopped°
- Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
TO REMOVE MOWER
Mower wilt be easier to remove from the
right side of tractor°
o Place attachment clutch in "DISEN-
GAGED" position°
o Move attachment lift lever forward to lower mower to its lowest position.
° Roll belt off engine pulley,
o Disconnect clutch rod from clutch lever by removing retainer spring.
o Disconnect
o Disconnect suspension arms from rear deck brackets by removing retainer springs,
Clutch
Clutch Rc
Suspension
Arms
Retainer
Spring
•Disconnect front links from deck by removing retainer springs.
o Raise lift lever to raise suspension arms. Slide mower out from under trac-
tor.
IMPORTANT" If an attachment other than the mower deck is to be mounted on the tractor, remove the front links.
TO INSTALL MOWER
o Raise attachment lift lever to its highest
position.
o Slide mower under tractor with dis-
charge guard to right side of tractor,, o Lower lift lever to its lowest position,, o Install mower in reverse order of
removal instructions.
Retainer
Spring
ine Pulley
Front
Link
Retainer Springs
(Both Sides)
Retainer Springs
(Both Sides)
21
