TO LEVEL MOWER HOUSING

Adjust the mower while tractor is parked on level ground or driveway. Make sure

tires are properly inflated (See "PROD-

UCT SPECIFICATIONS" section of this manual). If tires are over or underinflatad, you will not properly adjust your mower.

SIDE-TO-SIDE ADJUSTMENT

•Raise mower to its highest position.

•At the midpoint of both sides of mower. measure height from bottom edge of mower to ground. Distance "A" on both sides of mower should be the same or within 1/4" of each other.

•If adjustment is necessary, make adjustment on one side of mower only,

•To raise one side of mower, tighten lift link adjustment nut on that side.

•To lower one side of mower, loosen lift

link adjustment nut on that side. NOTE: Each full turn of adjustment nut will change mower height about 1/8".

•Recheck measurements after adjusting.

BottomEdge

_

__ BottomEdge

of Mowertof-_

_

fT_of Mowerto

Ground\ I

l_,uF4

_-_,_l }Ground

Suspension

FRONT-TO-BACK ADJUSTMENT IMPORTANT=. Deck must be level side-to- side. If the following front-to-back adjust- ment is necessary, be sure to adjust both

front links equally so mower will stay level side-to-side.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in

its highest position.

Check adjustment on right side of tractor. Measure distance "D" directly in front and behind the mandrel at bottom edge of mower housing as shown,

•Before making any necessary adjust- ments, check that both front links are equal in length. Both links should be approximately 10-3/8",

•If links are not equal in length, adjust one link to same length as other link.

•To lower front of mower loosen nut "E"

on both front links an equal number of turns.

•When distance "D" is 1/8" to 1/2" lower at front than rear, tighten nuts "F" against trunnion on both front links.

•To raise front of mower, loosen nut "F" from trunnion on both front links.

Tighten nut "E" on both front links an equal number of turns,

•When distance "D" is 1/8" to 1/2" lower

at front than rear, tighten nut "F" against trunnion on both front links.

•Recheck side-to-side adjustment.

Mandrel

_r,o

Both Front Links Should be Equal in Length

Front Links

TO REPLACE MOWER BLADE DRIVE BELT (See Illustration Next Page) The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake,

BELT REMOVAL -

•Remove mower from tractor (See "TO

REMOVE MOWER" in this section of this manual).

•Work belt off both mandrel pulleys and idler pulleys.

•Pull belt away from mower.

22

Page 201 Page 203
Page 202
Image 202
Craftsman 917.270752 owner manual To Level Mower Housing
Page 201 Page 203

917.270752 specifications

The Craftsman 917.270752 is a versatile and robust lawn tractor that caters to homeowners needing a reliable solution for their lawn care tasks. With its impressive array of features, this riding mower is designed to make maintaining your yard more efficient and enjoyable.

One of the standout features of the Craftsman 917.270752 is its powerful engine. Equipped with a 24 HP Briggs & Stratton engine, this tractor delivers a strong performance that allows you to tackle even the most challenging terrains. The engine's efficiency ensures a smooth operation, reducing the hassle of frequent refueling. Additionally, the automatic transmission allows for easy speed adjustments, providing a user-friendly experience for any operator.

The cutting deck is another highlight. The Craftsman 917.270752 comes with a 42-inch cutting deck made from high-quality materials, designed for durability and longevity. This wide deck ensures that you cover more ground in less time, making mowing a quicker task. The deck is adjustable, allowing users to customize the grass cutting height for a perfectly manicured lawn.

Another feature that enhances the mowing experience is the ease of maneuverability. The ergonomic design of the tractor, coupled with a tight turning radius, allows for easy navigation around obstacles such as trees and garden beds. This ensures that you can achieve clean edges and maintain neat landscaping without the need for additional trimming.

Comfort is also a key aspect of the Craftsman 917.270752. The tractor comes with an adjustable high-back seat, providing the operator with ample support during extended mowing sessions. The strategically placed controls are easily accessible, allowing for simple operation without requiring excessive reaching or effort.

Technologically, the Craftsman 917.270752 integrates useful features like a mulching kit and a bagging system that help manage grass clippings effectively. Owners can choose to mulch for nutrient-rich compost or collect clippings for a tidy finish, catering to different lawn care preferences.

In summary, the Craftsman 917.270752 is an exceptional lawn tractor that combines power, functionality, and comfort. With its notable engine performance, large cutting deck, maneuverability, and thoughtful design, it is an excellent choice for homeowners looking to elevate their lawn care routine. Whether you have a small or large lawn, this tractor provides the tools necessary for a beautiful landscape.
Top Page Image Contents