TO ADJUST MOWER CUTTING HEIGHT

The position of the attachment lift lever determines the cutting height.

Grasp lift lever.

Press plunger with thumb and move

lever to desired position.

The cutting height range is approxi- mately 1-1/2 to 4". The heights are measured from the ground to the blade tip with the engine not running. These heights are approximate and may vary depending upon soil conditions, height of grass and types of grass being mowed.

The average lawn should be cut to approximately 2-1/2 inches during the

cool season and to over 3 inches during hot months. For healthier and better

looking lawns, mow often and after moderate growth.

For best cutting performance, grass over 6 inches in height should be mowed twice. Make the first cut relatively high;

the second to desired height.

TO ADJUST GAUGE WHEELS

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

Adjust gauge wheels with tractor on a flat level surface.

Adjust mower to desired cutting height (See 'TOADJUST MOWER CUTTING

HEIGHT" in the Operation section of this manual).

With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropri- ate hole with shoulder bolt, 3/8 washer, and 3/8-16 Iocknut and tighten securely.

Repeat for opposite side installing gauge wheel in same adjustment hole.

Gauge Wheel .2_-_-_,_

Mounting\ _F f _

Bracket "'_ \ _i_ _

3/8 Washer __...E-_ ._

"J

Shoulder

Gauge Wheel_

_

Bolt

TO OPERATE MOWER

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disen- gage attachment clutch control.

ACAUTION: Do not operate the mower without either the entire grass catcher, on

mowers so equipped, or the deflector shield in place.

Attachment Clutch

Attachment Uft Lever

Lever "Engaged"

High Position

Low

PositionPosition

TO OPERATE ON HILLS

kCAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope, A slope guide at the back of your manual is provided for your use.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move gearshift lever to lst gear. Be sure you have allowed room for tractor to roll slightly as you restart movement.

To restart movement, slowly release parking brake and clutch/brake pedal.

Make all turns slowly.

13

Page 133
Image 133
Craftsman 917.270752 owner manual To Adjust Mower Cutting Height

917.270752 specifications

The Craftsman 917.270752 is a versatile and robust lawn tractor that caters to homeowners needing a reliable solution for their lawn care tasks. With its impressive array of features, this riding mower is designed to make maintaining your yard more efficient and enjoyable.

One of the standout features of the Craftsman 917.270752 is its powerful engine. Equipped with a 24 HP Briggs & Stratton engine, this tractor delivers a strong performance that allows you to tackle even the most challenging terrains. The engine's efficiency ensures a smooth operation, reducing the hassle of frequent refueling. Additionally, the automatic transmission allows for easy speed adjustments, providing a user-friendly experience for any operator.

The cutting deck is another highlight. The Craftsman 917.270752 comes with a 42-inch cutting deck made from high-quality materials, designed for durability and longevity. This wide deck ensures that you cover more ground in less time, making mowing a quicker task. The deck is adjustable, allowing users to customize the grass cutting height for a perfectly manicured lawn.

Another feature that enhances the mowing experience is the ease of maneuverability. The ergonomic design of the tractor, coupled with a tight turning radius, allows for easy navigation around obstacles such as trees and garden beds. This ensures that you can achieve clean edges and maintain neat landscaping without the need for additional trimming.

Comfort is also a key aspect of the Craftsman 917.270752. The tractor comes with an adjustable high-back seat, providing the operator with ample support during extended mowing sessions. The strategically placed controls are easily accessible, allowing for simple operation without requiring excessive reaching or effort.

Technologically, the Craftsman 917.270752 integrates useful features like a mulching kit and a bagging system that help manage grass clippings effectively. Owners can choose to mulch for nutrient-rich compost or collect clippings for a tidy finish, catering to different lawn care preferences.

In summary, the Craftsman 917.270752 is an exceptional lawn tractor that combines power, functionality, and comfort. With its notable engine performance, large cutting deck, maneuverability, and thoughtful design, it is an excellent choice for homeowners looking to elevate their lawn care routine. Whether you have a small or large lawn, this tractor provides the tools necessary for a beautiful landscape.