JVC 0404RYMMDWJEIN, LVT1140-007A manual Basic Operations, Adjusting the Volume, On the front panel

Basic Operations

Speaker and signal indicators on the display

Selecting different sources for picture and

By checking the following indicators, you can easily confirm which

sound

speakers you are activating and which signals are coming into this

While watching pictures from a video source, you can listen to

receiver.

sound of an audio source.

• Once you have selected a video source, pictures of the selected

Speaker indicators

Signal indicators

source are sent to the TV until you select another video source.

Press one of the audio source selection buttons while viewing the

picture from a video component such as the VCR or DVD

player, etc.

For RX-6042S

SB

SB

TAPE/CDR

CD

DVD

DVD MULTI

CD

TAPE/CDR

FM

AM

SOURCE NAME

FM/AM TV SOUND

VCR

What speaker indicators light depends on the speaker setting

On the front panel

On the remote

(for details, see “Setting the Speakers” on page 20).

• The frames of “L,” “C,” “R,” “LS,” and “RS” light up, when the

For RX-5042S

corresponding speakers are set to “LARGE” or “SMALL.” Sounds

CD

TAPE/CDR CD

DVD

come out of the speakers whose speaker indicators is lit on the

TAPE/CDR

FM/AM

display.

FM/AM

TV SOUND

VCR

SOURCE NAME

• The

indicator lights up when the subwoofer is activated (see

pages 13 and 20).

On the front panel

On the remote

The signal indicators light up to show the incoming signals.

Note:

L:

• When digital input is selected: Lights up when the left

For RX-6042S: When you see the picture through the COMPONENT

channel signal comes in.

VIDEO jacks, you cannot use this function.

•When analog input is selected: Always lights up.

R: • When digital input is selected: Lights up when the right

	channel signal comes in.
		Adjusting the Volume
	• When analog input is selected: Always lights up.
C:	Lights up when the center channel signal comes in.
LFE: Lights up when the LFE channel signal comes in.
LS:	Lights up when the left surround channel signal comes in.
RS:	Lights up when the right surround channel signal comes in.
S:	Lights up when the monaural surround channel signal
SB:	comes in.
	Lights up when the surround back channel signal comes in.

Note:

For RX-6042S: When “DVD MULTI” is selected as the source, “L,” “C,”

“R,” “LFE,” “LS,” and “RS” light up.

How to understand the speaker and signal indicator illumination

Ex. No sound comes out of the center speaker and surround speakers though center channel and surround channel signals are coming into this receiver.

On the front panel:

To increase the volume, turn MASTER VOLUME clockwise. To decrease the volume, turn it counterclockwise.

On the remote control:

To increase the volume, press VOLUME +.

To decrease the volume, press VOLUME –.

CAUTION:

Always set the volume to the minimum before starting any sources. If the volume is set at its high level, the sudden blast of sound energy can permanently damage your hearing and/ or ruin your speakers.

Note:

The volume level can be adjusted within the range of “0” (minimum) to “50” (maximum).

12