Craftsman 917.27108 HOW TO SETUP YOUR TRACTOR CHECKBATTERY Lift seatpan to raisedpositionandopen batteryboxdoor.

HOW TO SETUP YOUR TRACTOR
CHECKBATTERY
• Lift seatpan to raisedpositionandopen
batteryboxdoor.
•If this battery is put into service after
month and year indicated on label (label
located between terminals) charge bat-
tery for minimum of one hour at 6-10
amps. (See "BATTERY" in Maintenance
section ofthis manual for charging
instructions).
Battery
Label
Terminal
INSTALL SEAT
Adjust seat before tightening adjustment
knob.
•Remove cardboard pecking on seat pan.
Place seat on seat pan and assemble
shoulder bolt. Tighten shoulder bolt
securely.
issemble adjustment knob and fiat
washer loosely. Do not tighten.
Lower seat into operating position and
sit on seat.
• Slide seat until acomfortable position is
reached which allows you to press
clutch/brake pedal all the way down,
•Get off seat without moving its adjusted
Ipositlon.
•Raise seat and tighten adjustment knob
securely.
Seat
Seat Pan
ShoulderBolt
Adjustment
Knob Flat
Washer
CHECK TIRE PRESSURE
The tires onyour tractor were overinflated
at the factory for shipping purposes.
Correct tire pressure is importantfor best
cuttingperformance.
•Reduce tire pressure to PSI shown in
=PRODUCT SPECIFICATIONS" section
of this manual.
CHECK DECK LEVELNESS
For best cutting results, mower housing
should be propedy leveled. See =TO
LEVEL MOWER HOUSING" in the Service
and Adjustments section of this manual.
9