TRACTOR

Always observe safety rulas when performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be adjusted. (See =TO ADJUST BRAKE" in the Service and Adjustments section of

IMPORTANT: To ensure proper assem- bly, center hole in blade must align with star on mandrel assembly.

Reassemble hex belt, lock washer and flat washer in exact order as shown.

Tighten bolt securely (27-35 Ft. Lbs.

torque).

IMPORTANT: Blade bolt is Grade 8 heat treated.

this manual).

Edge Up

Mandrel Assembly

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also

prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working propedy. If your tractor does not function as descdbed, repair the problem immediately.

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

Blade Center

Hole

Flat Washer,

Lock Washer

/

_--'-Hex Bolt

*A Grads 8 heat treated bolt can be identified by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen-

ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

The blade can be sharpened with a file or on a gdnding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone balancer, follow the instructions

supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a hodzontal position. If either end of the blade moves downward, sharpen

the heavy end until the blade is balanced.

BLADE REMOVAL

Raise mower to highest position to allow access to blades.

Remove hex bolt, lock washer and flat washer securing blade.

Install new or resharpened blade with

trailing edge up towards deck as

shown.17

5/8"

f_lt_ecente r Hole

Page 17
Image 17
Craftsman 917.27113 owner manual To Sharpen Blade, Blade Removal

917.27113 specifications

The Craftsman 917.27113 is a riding lawn mower that has garnered attention for its robust features, user-friendly design, and performance efficiency. This model is particularly well-suited for homeowners with large yards, delivering strong cutting power and ease of use.

One of the standout features of the Craftsman 917.27113 is its powerful engine. Equipped with a reliable 17.5 HP Briggs & Stratton engine, this riding mower provides ample power for mowing through thick grass and uneven terrain. The engine’s design ensures consistent performance, while the automatic transmission allows for smooth and effortless acceleration, making it simple to navigate various landscapes.

The cutting deck is another significant aspect of the Craftsman 917.27113. It features a 42-inch cutting deck, making it ideal for mowing large areas efficiently. The cutting height can be adjusted to multiple positions, allowing users to customize their lawn maintenance according to the season or personal preference. The blade engagement system is easy to use, enabling quick activation of the blades without the hassle of manual adjustments.

In terms of comfort, the Craftsman 917.27113 was designed with the user in mind. It boasts a comfortable high-back seat that offers support during prolonged mowing sessions. The ergonomically designed steering wheel ensures that users can navigate effortlessly, even in tight corners. The spacious foot area adds to the overall comfort, allowing for a more relaxed mowing experience.

Another notable technology in this model is the mulching capability. With the optional mulch plug, users can convert the mower to recycle grass clippings back into the lawn, promoting healthier grass while reducing the need for bagging. This eco-friendly feature not only helps in maintaining a nutrient-rich lawn but also simplifies post-mowing clean-up.

Safety is a priority in the Craftsman 917.27113, with features like the blade brake that stops the blades when the operator leaves the seat. This ensures that users remain safe while operating the mower. The design also incorporates sturdy construction materials that enhance the mower’s durability, making it a worthwhile investment for long-term lawn care.

Overall, the Craftsman 917.27113 delivers a blend of power, comfort, and technology. Its robust performance, customizable cutting options, and user-friendly features make it an excellent choice for homeowners looking to keep their lawns in pristine condition. Whether for regular mowing or tackling overgrown areas, this riding mower stands out as a reliable and effective tool in lawn maintenance.