TRACTOR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

Keep tires free of gasoline, oil, or insect control chemicals which can harm rubber.

Avoid stumps, stones, deep ruts, sharp

objects and other hazards that may cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant may be purchased from your local parts dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure operator presence and interlock systems are working properly. If your tractor does not function as described, repair the problem immediately

The engine should not start unless the clutch/brake pedal is fully depressed and attachement clutch control is in the

disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer securing blade.

3.Install new or resharpened blade with trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star on mandrel assembly.

4.Reassemble hex bolt, lock washer and flat washer in exact order as

shown.

5.Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT:

Blade bolt is grade 8 heat

treated.

 

Trailing I

Mandrel Assembly

Center

 

 

Hole

Flat Washer

\

Lock Washer

 

_-_--Hex Bolt (Grade)'

*A Grade 8 heat treated bolt can be identified by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will cause excessive vibration and eventual

damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone

balancer. (When using a cone bal- ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing

blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded

portion of the steel bolt or pin and hold

the bolt or pin parallel with the ground. If blade is balanced, it should remain in

a horizontal position. If either end of the blade moves downward, sharpen

the heavy end until the blade is balanced.

5/8" Bolt or Pin

Center Hole

BATTERY

Your tractor has a battery charging system which is sufficient for normal use

18

Page 18
Image 18
Craftsman 917.271554 owner manual Tires

917.271554 specifications

The Craftsman 917.271554 is a reliable and efficient lawn tractor designed to meet the needs of homeowners looking for a sturdy, user-friendly, and durable machine for lawn care. This model is particularly well-regarded for its combination of performance, comfort, and advanced features, making it a popular choice among casual gardeners and landscaping enthusiasts alike.

One of the standout characteristics of the Craftsman 917.271554 is its powerful engine. Featuring a 20 HP Kohler engine, this lawn tractor delivers the torque and reliability required for tackling various mowing tasks. The engine provides ample power for a variety of terrains, ensuring a consistent and clean cut across your lawn. Its reliable starting system also guarantees that the tractor is ready to go whenever you are, minimizing downtime and maximizing efficiency.

The Craftsman 917.271554 incorporates a wide 42-inch cutting deck, allowing users to cover more ground in fewer passes. The deck is adjustable with multiple cutting heights, providing versatility for different grass types and seasonal conditions. Users can easily switch between heights with a simple lever, ensuring optimal cutting performance throughout the year.

Another notable feature is the hydrostatic transmission, which allows for smooth and effortless speed adjustments. This technology enhances the overall driving experience, enabling users to control their mowing speed effectively without the hassle of shifting gears. This characteristic is especially beneficial when navigating around yard obstacles or mowing in tight spaces.

Comfort is a priority in the Craftsman 917.271554 design. It boasts a high-back seat cushioned for support during extended mowing sessions, and the ergonomically designed controls allow users to operate the machine with ease. The design includes a tilt steering wheel, providing additional comfort for users of varying heights.

Further enhancing its capability, the Craftsman 917.271554 is equipped for versatility. It has optional attachments such as baggers, mulchers, and snow plows, allowing it to be used for tasks beyond mowing. This adaptability makes it a valuable investment for homeowners who seek a multi-functional machine.

In conclusion, the Craftsman 917.271554 lawn tractor combines power, efficiency, and comfort, making it an excellent choice for homeowners who want a dependable and versatile lawn care solution. With its robust engine, adjustable cutting deck, hydrostatic transmission, and various attachments, this model stands out as a top contender in the realm of residential lawn tractors.