BELT INSTALLATION -

4.Install new belt in reverse order of removal.

5.Make sure belt is in all pulley grooves and inside all belt guides.

6.Install mower in reverse order of removal instructions.

Mandrel

 

Idler Pulleys

Pulley _

 

Mandrel

_"_

_

_---J Pulley

--_,,t i_77 \

TO ADJUST BRAKE

Your tractor is equipped with an adjust- able brake system which is mounted on

the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

1.Depress clutch/brake pedal and engage parking brake.

2.Measure distance between brake

operating arm and nut "A" on brake rod.

3.If distance is other than 1-1/2", loosen jam nut and turn nut "A" until distance becomes 1-1/2". Retighten jam nut against nut "A".

4.Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest

gear, further maintenance is neces- sary. Contact a Sears or other

qualified service center.

"Engaged"

Nut "A"

With Parking Brake

._JamNut

_ Operating Arm

TO REPLACE MOTION DRIVE BELT

Park the tractor on level surface. Engage parking brake. For assistance, there is a

belt installation guide decal on bottom side of left footrest.

1.Remove mower (See "TO REMOVE MOWER" in this section of this

manual.)

2.Remove belt from stationary idler and clutching idler.

3.Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keepers.

4.Pull belt toward front of tractor and remove downwards from around engine pulley.

5.Install new belt by reversing above procedure.

Engine

Pulley

Clutching

Idler

Stationary 7

Idler

T_lnyaxle i:

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

1.Make sure transaxle is in neutral (N). NOTE: When the tractor rear wheels move

freely, the transaxle is in neutral.

2.Loosen adjustment bolt in front of the right rear wheel.

3.Position the gear shift lever in the neutral (N) position.

4.Tighten adjustment bolt securely. NOTE: If additional clearance is needed

to get to adjustment bolt, move mower deck height to the lowest position.

25

Page 25
Image 25
Craftsman 917.271815 To Adjust Brake, To Replace Motion Drive Belt, Transaxle Gear Shift Lever Neutral Adjustment

917.271815 specifications

The Craftsman 917.271815 is a powerful and efficient riding mower designed to meet the demands of homeowners who want to maintain a well-groomed lawn with ease. This mower is equipped with a rugged and reliable engine, ensuring consistent performance and longevity. With its user-friendly design and innovative features, the 917.271815 stands out as a top choice for landscaping tasks.

One of the main features of the Craftsman 917.271815 is its robust engine. Powered by a 21-horsepower Briggs & Stratton engine, this riding mower provides ample power to tackle tough terrains and thick grass with minimal effort. The engine's innovative technology promotes efficient fuel consumption, allowing users to mow larger areas without frequent refueling.

The mower’s cutting deck is another highlight. It features a 42-inch cutting width, allowing for a wide mowing path that reduces the time spent mowing. The adjustable cutting height, ranging from 1 to 4 inches, gives users the flexibility to achieve the desired lawn height, ensuring a professional-looking finish.

Ergonomically designed for comfort, the Craftsman 917.271815 features a high-back commander’s seat, providing excellent support during extended mowing sessions. The intuitive control layout, including a sleek steering wheel and foot pedal operation, enhances maneuverability, making it easy to navigate around obstacles in the yard.

Safety is paramount in the design of the 917.271815. It incorporates several safety features, including an automatic safety shut-off that activates when the operator leaves the seat. This technology prevents accidents and enhances user safety while mowing.

The mower's durable construction ensures it can withstand the rigors of regular use. With heavy-duty materials used throughout, the Craftsman 917.271815 is designed to resist wear and tear, reducing the need for frequent repairs. Additionally, the mower features a reliable transmission system that allows for smooth operation and easy shifting between speeds.

Another significant aspect is the mower's versatility. It can be equipped with various attachments, transforming it into a multi-functional tool for various yard tasks, such as leaf collection, snow removal, and more.

Overall, the Craftsman 917.271815 is a well-rounded riding mower that combines power, comfort, and versatility, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its advanced features and durable design, it promises to deliver top performance season after season.