TRACTOR

Always observe safety rules when performing any maintenance.

BRAKE OPERATION

If tractor requires more than six (6) feet stopping distance at high speed in highest gear, then brake must be ad- justed. (See "TO ADJUST BRAKE" in the Service and Adjustments section of this manual).

TIRES

Maintain proper air pressure in all tires (See "PRODUCT SPECIFICATIONS" section of this manual).

Keep tires free of gasoline, oil, or insect control chemicals which can harm

rubber.

Avoid stumps, stones, deep ruts, sharp objects and other hazards that may

cause tire damage.

NOTE: To seal tire punctures and prevent flat tires due to slow leaks, tire sealant

may be purchased from your local parts

dealer. Tire sealant also prevents tire dry rot and corrosion.

OPERATOR PRESENCE SYSTEM

Be sure that operator presence and interlock systems are working properly. If your tractor does not function as de- scribed below, repair the problem immediately.

The engine should not start unless the

clutch/brake pedal is fully depressed and attachment clutch control is in the

disengaged position.

When the engine is running, any attempt by the operator to leave the seat without first setting the parking brake should shut off the engine.

When the engine is running and the attachment clutch is engaged, any attempt by the operator to leave the seat should shut off the engine.

The attachment clutch should never

operate unless the operator is in the seat.

BLADE CARE

For best results mower blades must be

kept sharp. Replace bent or damaged blades.

BLADE REMOVAL

1.Raise mower to highest position to allow access to blades.

2.Remove hex bolt, lock washer and flat washer secudng blade.

3.Install new or resharpened blade with

trailing edge up towards deck as shown.

IMPORTANT: To ensure proper assembly, center hole in blade must align with star

_,andrel assembly.

4.Reassemble hex bolt, lock washer and flat washer in exact order as shown.

5.Tighten bolt securely (27-35 Ft. Lbs. torque).

IMPORTANT: Blade bolt is grade 8 heat treated.

Trailing Ed_ .=Up

Mandrel Assembly

Blade Center Hole

Flat

\Star

*A Grade 8 heat treated bolt can be identified

by six lines on the bolt head.

TO SHARPEN BLADE

NOTE: We do not recommend sharpen- ing blade - but if you do, be sure the blade is balanced.

Care should be taken to keep the blade balanced. An unbalanced blade will

cause excessive vibration and eventual

damage to mower and engine.

The blade can be sharpened with a file or on a grinding wheel. Do not attempt to sharpen while on the mower.

To check blade balance, you will need a 5/8" diameter steel bolt, pin, or a cone balancer. (When using a cone bal-

ancer, follow the instructions supplied with balancer.)

NOTE: Do not use a nail for balancing blade. The lobes of the center hole may appear to be centered, but are not.

Slide blade on to an unthreaded portion of the steel bolt or pin and hold the bolt or pin parallel with the ground. If blade is balanced, it should remain in a horizontal position. If either end of the blade moves downward, sharpen the heavy end until the blade is balanced.

5/8" Bolt

Blade

 

or Pin

 

 

Center Hole

20

Page 20
Image 20
Craftsman 917.271815 owner manual Brake Operation, Operator Presence System, Blade Care, Blade Removal, To Sharpen Blade

917.271815 specifications

The Craftsman 917.271815 is a powerful and efficient riding mower designed to meet the demands of homeowners who want to maintain a well-groomed lawn with ease. This mower is equipped with a rugged and reliable engine, ensuring consistent performance and longevity. With its user-friendly design and innovative features, the 917.271815 stands out as a top choice for landscaping tasks.

One of the main features of the Craftsman 917.271815 is its robust engine. Powered by a 21-horsepower Briggs & Stratton engine, this riding mower provides ample power to tackle tough terrains and thick grass with minimal effort. The engine's innovative technology promotes efficient fuel consumption, allowing users to mow larger areas without frequent refueling.

The mower’s cutting deck is another highlight. It features a 42-inch cutting width, allowing for a wide mowing path that reduces the time spent mowing. The adjustable cutting height, ranging from 1 to 4 inches, gives users the flexibility to achieve the desired lawn height, ensuring a professional-looking finish.

Ergonomically designed for comfort, the Craftsman 917.271815 features a high-back commander’s seat, providing excellent support during extended mowing sessions. The intuitive control layout, including a sleek steering wheel and foot pedal operation, enhances maneuverability, making it easy to navigate around obstacles in the yard.

Safety is paramount in the design of the 917.271815. It incorporates several safety features, including an automatic safety shut-off that activates when the operator leaves the seat. This technology prevents accidents and enhances user safety while mowing.

The mower's durable construction ensures it can withstand the rigors of regular use. With heavy-duty materials used throughout, the Craftsman 917.271815 is designed to resist wear and tear, reducing the need for frequent repairs. Additionally, the mower features a reliable transmission system that allows for smooth operation and easy shifting between speeds.

Another significant aspect is the mower's versatility. It can be equipped with various attachments, transforming it into a multi-functional tool for various yard tasks, such as leaf collection, snow removal, and more.

Overall, the Craftsman 917.271815 is a well-rounded riding mower that combines power, comfort, and versatility, making it an excellent choice for homeowners looking to maintain their lawns efficiently. With its advanced features and durable design, it promises to deliver top performance season after season.