NOTE: To protecthood from damage when transportingyour tractoron a truck or a trailer,be sure hood is closed and securedto tractor. Use an appropriate meansof tyinghood to tractor(rope, cord, etc.).

TOWING CARTS AND OTHER ATTACH- MENTS

Tow only the attachments that are

recommended by and comply with specifications of the manufacturer of your

tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose contro! of your tractor.

BEFORE STARTINGTHE ENGINE

CHECK ENGINE OIL LEVEL

The engine in your tractor has been shipped, from the factory, already filled with summer weight oil.

1.Check engine oil with tractor on level ground.

2.Unthread and remove oil fill cap/ dipstick; wipe oil off. Reinsert the dipstick into the tube and rest oil fill cap on the tube. Do not thread the cap onto the tube. Remove and read oil level. If necessary, add oil until

"FULL" mark on dipstick is roached. Do not overfill.

For cold weather operation you should

change oil for easier starting (See "OIL

VISCOSITY CHART" in the Mainte- nance section of this manual).

To change engine oil, see the Mainte- nance section in this manual.

ADD GASOLINE

Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide

deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness.

IMPORTANT: When operatingin temperaturesbelow32°F(0°C), use fresh, clean winter grade gasolineto help insure good cold weather starting, _WARNING: Experienceindicatesthat alcoholblendedfuels (called gasoholor using ethanol or methanol)can attract moisture whichleads to separationand formation of acidsduringstorage. Acidic gas can damage the fuel systemof an engine whilein storage. To avoidengine problems,the fuel systemshouldbe emptiedbeforestorageof 30 daysor longer. Drainthe gas tank, startthe engine and let it run untilthe fuel lines and carburetorare empty, Use fresh fuel nextseason. See StorageInstructionsfor additionalinformation. Never use engine or carburetorcleaner productsin the fuel tank or permanentdamage may occur. _I,CAUTION: Fillto bottomof gas tank filler neck. Do notoverfill. Wipe offany spilledoil or fuel. Do not store,spillor use gasolinenear an openflame.

TO START ENGINE

When starting the engine for the first time or if the engine has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.

1.Be sure freewheel control is in the transmission engaged position.

2.Sit on seat in operating position, depress clutch/brake pedal and set parking brake.

3.Place motion control lever in neutral

(N)position.

4.Move attachment clutch to "DISEN-

GAGED" position.

5.Move throttle control to choke position. NOTE: Before starting, read the warm and cold starting procedures below.

6.Insert key into ignition and turn key clockwise to =START" position and release key as soon as engine starts. Do not run starter continuously for more than fifteen seconds per minute.

If the engine does not start after several attempts, move throttle control to fast position, wait a few minutes and

try again. If engine still does not start, move the throttle control beck to the choke position and retry.

WARM WEATHER STARTING (50° F and above)

7.When engine starts, move the throttle control to the fast position.

15

Page 15
Image 15
Craftsman 917.27206 Towing Carts and Other ATTACH- Ments, Before Startingthe Engine Check Engine OIL Level, ADD Gasoline

917.27206 specifications

The Craftsman 917.27206 is a highly regarded riding lawn mower that has been designed for homeowners seeking an efficient and user-friendly solution for maintaining their lawns. This machine merges power with precision, offering a variety of features that cater to different mowing needs.

One of the standout characteristics of the Craftsman 917.27206 is its robust engine. Equipped with a powerful 19 horsepower Briggs & Stratton engine, this mower ensures reliable performance on a range of terrains. The engine is designed for easy starting and delivers consistent power, making lawn maintenance a breeze even in challenging conditions.

The mower features a 42-inch cutting deck, allowing for an efficient mowing experience. This wide cutting path reduces the time spent mowing, while the deck’s design ensures a clean and even cut. The adjustable cutting height provides versatility, allowing users to select from various settings based on grass height and personal preference. The craftsmanship evident in the deck design also facilitates superior grass dispersal, reducing clumping and enhancing lawn health.

Durability is another defining feature of the Craftsman 917.27206. The heavy-duty steel frame is built to withstand the rigors of regular use, ensuring longevity. The reinforced components alike the front axle and the deck contribute to a sturdy build that is equipped to handle bumps and rough patches throughout your yard.

Designed with user comfort in mind, the mower boasts an ergonomic seat that ensures a comfortable riding experience. The controls are intuitively placed, allowing for easy operation while navigating your lawn. The tight turning radius enhances maneuverability, making it easier to navigate around flower beds and landscaping features.

Another notable technology integrated into the Craftsman 917.27206 is the automatic transmission, which provides seamless speed control. This feature simplifies operation, allowing users to focus on achieving a consistent cut rather than managing gears. The mower also offers rear bagging capabilities, making it easy to collect clippings for disposal or composting.

In summary, the Craftsman 917.27206 is an impressive riding mower characterized by its powerful engine, durable construction, and user-friendly features. Whether you are a seasoned homeowner or new to lawn care, this mower is designed to make maintaining your yard a simpler, more enjoyable task.