Craftsman 917.272464 owner manual Lubrication Chart

FILL	IN DATES
AS YOU COMPLETE				_.,,'_	t'J:_	"_._'_	G_'_	#f"
	Check	Brake Operation
	Check	Tire Pressure	_	_,_
T	Check	Operator Presence	and
	Interlock Systems		V'
R	Check	for Loose Fasteners	V'		V's	V	_

TLubrication Chart

0	Check Battery	Level	_3
A	SharpeNReplace	Mower B_ades

RClean Battery and Terminals

Check	Transaxle	Cooling		I_
Check V-Be_ts
Check	Engine Oil Level			V /
Change	Engine	Oil	(with oil filter)	I_1_=	I_
E Change	Engine	Oil	(without oil filter)	1_.2	V'

N		Filter	It,//:
G	Clean Air Screen
II M	Inspect	Muffler/SparkArrester
i E	Replace	Oil Filter (If equipped)
	Clean Engine Cooling		Fins

Replace Spark Ptug

Replace Air Filter Paper Cartridge

Replace Fuel I_lter

I - Change more often when operating under a heavy load or in i_gh ambient temperatures,

2 - Se_ice more often when operating in dirty or dusty conditions.

Ik_1.2

ik/=

_2 Ik/

3- Replace blades more often when mowing in sandy soil.

4- Not required if equipped with maintenance-freebattery.

5- Tighten front axle pivot bbit to 35 ft.-Ibs, maximum.

DO not overtight_n.

GENERAL RECOMMENDATIONS

The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive

full value from the warranty, operator must maintain tractor as instructed in this manual.

Some adjustments will need to be made

periodically to properly maintain your tractor.

All adjustments in the Service and Adjustments section of this manual should be checked at least once each season.

•Once a year you should replace the

spark plug, clean or replace air filter, and check blades and belts for wear. A

new spark plug and clean air filter assure proper air-fuel mixture and help your engine run better and last longer.

BEFORE EACH USE

1.Check engine oil level,

2.Check brake operation.

3.Check tire pressure.

4.Check operator presence and

interlock systems for proper opera- tion.

5.Check for loose fasteners.

LUBRICATION CHART

ZerkZerk

Bearing
Zerk	..._aring	Zerk
	\
	/
_)Engine /

i

it

_) General Purpose Grease

(_) REFERTO Maintenance =ENGINE"SECTION

IMPORTANT: Do not oil or grease the pivot points which have special nylon bearings. Viscous lubricants will attract dust and dirt that will shorten the life of

the self-lubricating bearings. If you feel they must be lubricated, use only a dry, powdered graphite type lubricant sparingly.

18