MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
T Interlock Systemsv" R Check for Loose Fasteners
A Sharpen/Replace Mower Blades
C Lubrication Chart
0Check Battery Level
RClean Battery and Terminals Check Transaxle Cooling Check
Check Engine Oil Level
Change Engine Oil (with oil filter)
E Change Engine Oil (without oil filter)
SERVICE DATES
v'i/
i/,,2
NClean Air Filter
GClean Air Screen
Inspect Muffler/Spark
Arrester
,/
EReplace Oil Filter (If equipped) Clean Engine Cooling Fins Replace Spark Plug
Replace Air Filter Paper Cartridge Replace Fuel Filter
1- Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil,
4 - Not required if equipped with
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, operator must maintain tractor as instructed in this manual.
Some adjustments will need to be made periodically to properly maintain your trac- tor.
At least once a season, check to see if you should make any of the adjustments
described in the Service and Adjustments section of this manual.
•At least once a year you should replace
the spark plug, clean or replace air filter, and check blades and belts for wear.
A new spark plug and clean air filter assure proper
BEFORE EACH USE
1.Check engine oil level.
2.Check brake operation.
3.Check tire pressure.
4.Check operator presence and interlock systems for proper operation.
5.Check for loose fasteners.
| LUBRICATION | CHART | |
dPSpindle |
| Spindle | |
Zerk | ; _r | Zerk | |
| n |
|
|
_Front Wheel |
| ; _Front Wheel | |
Bearing |
| ........ | ,L._Beanng Zerk |
Zerk |
|
|
|
@Engine | ,. | ,, | |
| t | i | ! |
| ,,! |
|
, ', o1964',
(_ General Purpose Grease
@ REFER TO Maintenance "ENGINE" SECTION
IMPORTANT: Do not oil or grease the pivot points which have special nylon
bearings. Viscous lubricants will attract dust and dirt that will shorten the life of the
18