TO START ENGINE WITH A WEAK BAT- TE RY

_ILWARNING: Lead-acidbatteries gen- erate explosive gases. Keep sparks, flame and smoking materials away from bat-

teries. Always wear eye protection when around batteries.

If your battery is too weak to start the

engine, it should be recharged. (See "BAT- TERY" in the MAINTENANCE section of

this manual)•

If "jumper cables" are used for emergency starting, follow this procedure: IMPORTANT: Your tractor is equipped with a 12 volt system• The other vehicle must also be a 12 volt system• Do not use your tractor battery to start other vehicles.

TO ATTACH JUMPER CABLES -

1.Connect one end of the RED cable to the POSITIVE (+) terminal of each battery(A-B), taking care not to short against tractor chassis.

2.Connect one end of the BLACK cable to the NEGATIVE (-) terminal (C) of fully charged battery.

3.Connect the other end of the BLACK cable (D) to good chassis ground, away from fuel tank and battery•

TO REMOVE CABLES, REVERSE ORDER -

1.BLACK cable first from chassis and then from the fully charged battery.

2.RED cable last from both batteries•

Weak or Dead Fully Charged

BatteryBattery

REPLACING BATTERY

_WARNING: Do not short battery terminals by allowing a wrench or any other object to contact both terminals at the same time. Before connecting battery, remove metal bracelets, wristwatch bands, rings, etc.

Positive terminal must be connected first to prevent sparking from accidental grounding.

1.Lift hood to raised position•

2.Remove terminal guard.

3.Disconnect BLACK battery cable then RED battery cable and carefully remove battery from tractor.

4.Install new battery with terminals in same position as old battery•

5.Reinstall terminal guard•

6.First connect RED battery cable to positive (+) battery terminal with hex

bolt and keps nut as shown• Tighten securely.

7.Connect BLACK grounding cable to negative (-) battery terminal with re- maining hex bolt and keps nut. Tighten securely

8.Close terminal access doors.

9.Close hood.

Hex Bolt

Keps Nut

Cable

Terminallegative

Guard _,L (Black)

Cable

TO REPLACE HEADLIGHT BULB

1.Raise hood.

2.Pull bulb holder out of the hole in the backside of the grill•

3.Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill•

4.Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause

your tractor to run poorly, stop running, or prevent it from starting.

Check wiring• See electrical wiring

diagram in the Repair Parts section•

TO REPLACE FUSE

Replace with 20 amp automotive-type

plug-in fuse. The fuse holder is located behind the dash.

25

Page 25
Image 25
Craftsman 917.27377 To Start Engine with a Weak BAT- TE RY, To Attach Jumper Cables, Replacing Battery, To Replace Fuse

917.27377 specifications

The Craftsman 917.27377 is a robust lawn mower designed to provide homeowners with an efficient and reliable solution for lawn maintenance. Renowned for its durability and user-friendly features, it stands as a testament to Craftsman’s commitment to quality.

One of the standout features of the 917.27377 is its powerful engine. Equipped with a 17.5 HP Briggs & Stratton engine, it delivers ample power for tackling tough grass, ensuring that both small yards and larger lawns are easily managed. The engine is also designed for easy starting, minimizing the frustration often associated with mower maintenance.

The cutting deck of the Craftsman 917.27377 measures 42 inches, allowing for a wide cutting path that reduces mowing time. This size is particularly advantageous for homeowners with moderately-sized lawns, providing a balance between maneuverability and efficiency. The deck is constructed with robust materials that ensure longevity while featuring a reinforced washout port for easy cleaning after use, which helps maintain optimal performance.

Another characteristic that sets the Craftsman 917.27377 apart is its adjustable cutting height, which offers a range from 1.5 inches to 4 inches. This flexibility allows homeowners to customize their mowing experience based on the season and grass type, promoting a healthier lawn. The mower also features an easy-to-use lever that allows for quick adjustments without needing any tools.

Technologically, the Craftsman 917.27377 stands out with its automatic transmission, providing smooth and effortless speed adjustments as you mow. This feature enhances user experience, particularly in varying terrain, since the mower can easily adapt to inclines and declines.

Comfort is also a priority in the design of the Craftsman 917.27377. It includes a plush seating area with an ergonomic design that helps reduce fatigue during extended use. The operator's controls are strategically positioned, making them easily accessible to enhance safety and convenience while mowing.

In conclusion, the Craftsman 917.27377 is an impressive lawn mower combining power, versatility, and comfort. Its reliable engine, generous cutting deck, adjustable height settings, and user-friendly technology make it an ideal choice for homeowners seeking to maintain their lawns with ease and efficiency. The Craftsman 917.27377 exemplifies the brand's dedication to delivering high-quality lawn care products that meet the needs of various users.