INSTALL SEAT

Adjust seat before tightening adjustment knob.

1.Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

2.Pivot seat upward and remove from the cardboard packing. Remove the cardboard packing and discard.

3.Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

4.Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

5.Pivot seat and pan forward and as- semble adjustment knob and flat

washer loosely. Do not tighten.

6.Lower seat into operating position and sit in seat.

7.Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

8.Get off seat without moving its ad- justed position.

9.Raise seat and tighten adjustment knob securely.

Seat

Seat Pan

Bolt

Adjl Knob

NOTE: You may now roll or drive your

tractor off the skid. Follow the appropriate instruction below to remove the tractor

from the skid.

TO ROLLTRACTOR OFF SKID (See

Operation section for location and function of controls)

1.Press lift lever plunger and raise

attachment lift lever to its highest po- sition.

2.Release parking brake by depressing clutch/brake pedal.

3.Place gearshift lever in neutral (N) position.

4.Roll tractor forward off skid.

5.Remove banding holding deflector shield up against tractor.

TO DRIVE TRACTOR OFF SKID (See Operation section for location and function of controls)

_WARNING: Before starting, read, un- derstand and follow all instructions in the

Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other

people and objects.

1.Be sure all the above assembly steps have been completed.

2.Check engine oil level and fill fuel tank with gasoline.

3.Sit on seat in operating position, depress clutch/brake pedal and set the parking brake.

4.Place gear shift lever in neutral (N) position.

5.Press lift lever plunger and raise

attachment lift lever to its highest posi- tion.

6.Start the engine. After engine has started, move throttle control to idle

position.

7.Depress clutch/brake pedal into full "BRAKE" position and hold. Move gearshift lever to 1st gear.

8.Slowly release clutch/brake pedal and slowly drive tractor off skid.

9.Apply brake to stop tractor, set park- ing brake and place gearshift lever in neutral position.

10.Turn ignition key to "STOP" position. Continue with the instructions that follow.

9

Page 8 Page 10
Page 9
Image 9
Craftsman 917.27377 manual Install Seat, To Rolltractor OFF Skid See
Page 8 Page 10

917.27377 specifications

The Craftsman 917.27377 is a robust lawn mower designed to provide homeowners with an efficient and reliable solution for lawn maintenance. Renowned for its durability and user-friendly features, it stands as a testament to Craftsman’s commitment to quality.

One of the standout features of the 917.27377 is its powerful engine. Equipped with a 17.5 HP Briggs & Stratton engine, it delivers ample power for tackling tough grass, ensuring that both small yards and larger lawns are easily managed. The engine is also designed for easy starting, minimizing the frustration often associated with mower maintenance.

The cutting deck of the Craftsman 917.27377 measures 42 inches, allowing for a wide cutting path that reduces mowing time. This size is particularly advantageous for homeowners with moderately-sized lawns, providing a balance between maneuverability and efficiency. The deck is constructed with robust materials that ensure longevity while featuring a reinforced washout port for easy cleaning after use, which helps maintain optimal performance.

Another characteristic that sets the Craftsman 917.27377 apart is its adjustable cutting height, which offers a range from 1.5 inches to 4 inches. This flexibility allows homeowners to customize their mowing experience based on the season and grass type, promoting a healthier lawn. The mower also features an easy-to-use lever that allows for quick adjustments without needing any tools.

Technologically, the Craftsman 917.27377 stands out with its automatic transmission, providing smooth and effortless speed adjustments as you mow. This feature enhances user experience, particularly in varying terrain, since the mower can easily adapt to inclines and declines.

Comfort is also a priority in the design of the Craftsman 917.27377. It includes a plush seating area with an ergonomic design that helps reduce fatigue during extended use. The operator's controls are strategically positioned, making them easily accessible to enhance safety and convenience while mowing.

In conclusion, the Craftsman 917.27377 is an impressive lawn mower combining power, versatility, and comfort. Its reliable engine, generous cutting deck, adjustable height settings, and user-friendly technology make it an ideal choice for homeowners seeking to maintain their lawns with ease and efficiency. The Craftsman 917.27377 exemplifies the brand's dedication to delivering high-quality lawn care products that meet the needs of various users.
Top Page Image Contents