Panasonic HC-V720 owner manual REC Mode, Relay REC, ≥ Recordable time using the battery l

[REC MODE]

Switch the picture quality and recording format of the motion pictures to record.

MENU : [RECORD SETUP] # [REC MODE] # desired setting

[PH]/[HA]/[HG]/[HE]*1:	Set the recording format to 1080/60i.
[1080/60p]*2:	Set the recording format to 1080/60p.
[iFrame]*3:	Set the recording format to iFrame.

*1 Recording will have higher quality in the order of [PH], [HA], [HG] and [HE].

*2 This option allows you to record in 1080/60p (1920k1080/60 progressive), which is the highest picture quality for this unit.

*3 [iFrame] is a format suitable for Mac (iMovie’11). It is recommended for when using a Mac.

≥Recordable time using the battery (l 12)

≥This function’s default setting is [HG] mode.

≥Please refer to page 189 for details about approximate recordable time.

≥When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded (particularly when recording in [HE] mode), mosaic-type noise may appear at playback.

HC-V720M

[RELAY REC]

It is possible to continuously record motion picture to an SD card when there is no space available in the built-in memory. (It allows you to record only to SD card from built-in memory.)

≥Set [MEDIA SELECT] to [Built-inMemory].

≥Set [REC MODE] to [PH], [HA], [HG], [HE] or [1080/60p].

≥Insert an SD card.

MENU : [RECORD SETUP] # [RELAY REC] # [ON]

≥ is displayed on the screen. will disappear when space in the built-in memory is gone and the recording to the SD card starts.

≥Relay Recording can only be performed once.

≥Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into the SD card. (l 98, 106)

≥Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE COMBINE], a message is displayed. You will be able to perform Relay Recording by touching [YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.

≥Still pictures are recorded to the SD card after Relay Recording.

≥ is displayed on the thumbnail display during the playback of the scene that was relay- recorded on the built-in memory.

- 63 -