Panasonic HC-V720 owner manual MIC Level, Touch / to adjust, Auto, Set

[MIC LEVEL]

When recording, the input level from the built-in microphones and the external microphone terminal can be adjusted.

1Select the menu.

MENU : [RECORD SETUP] # [MIC LEVEL] # desired setting

[AUTO]:		AGC is activated, and the recording level is adjusted automatically.
[SET	]:	The desired recording level can be set. AGC is activated, and sound
		distortions are reduced.
[SET	]:	The desired recording level can be set. Sounds are recorded in
		natural quality.

2(When [SET ]/[SET ] is selected)

Touch / to adjust.

≥The adjustment screen to be displayed depends on the setting of [5.1ch/2ch].

≥Adjust the microphone input level so that the last

2 bars of the gain value are not red. (Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

3Touch [ENTER].

≥Touch [EXIT] to complete the setting.

(When set to [5.1ch])

ACenter B Front left C Back left D Front right E Back right

F Microphone input level

≥When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom rate.

≥The sound will be recorded in stereo (2ch) when [5.1ch/2ch] is set to [2ch] or an external microphone is input.

≥ (microphone input level meter) is displayed on the screen when [5.1ch/2ch] is set to

[5.1ch], and (microphone input level meter) is displayed when [5.1ch/2ch] is set to [2ch] and [MIC LEVEL] is set to a setting other than [AUTO].

≥The microphone input level meter shows the largest volume for the microphones.

≥You cannot record with the audio completely muted.

- 72 -