Panasonic HC-V720 owner manual Quick Power on, Quick Start, Close the LCD monitor

[QUICK POWER ON]

The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set

to or .

MENU : [SETUP] # [QUICK POWER ON] # [ON]

≥Depending on the recording conditions, start time may be longer than 1 second.

≥In the Quick Power On Mode, the zoom magnification becomes approx. 1k.

[QUICK START]

This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened.

≥When in Quick Start Standby Mode about 80% of the power used in recording pause mode is being consumed, so the recording time will be reduced.

≥HC-V720 / HC-V710

Quick Start will not work if there is no SD card inserted.

≥HC-V720M

Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no SD card inserted.

1Select the menu.

MENU : [SETUP] # [QUICK START] # [ON]

2Close the LCD monitor.

The status indicator A flashes green and the unit goes into Quick Start Standby Mode.

≥The lens cover does not close.

3Open the LCD monitor.

The status indicator A lights red and the unit is put into recording pause.





≥Quick Start Standby Mode is canceled if jabout 5 minutes elapsed

jmode is set to

≥Depending on the recording conditions and menu settings, time for Quick Start may be longer than 0.6 seconds.

≥It may take some time for Automatic White Balance to adjust.

≥In the Quick Start Mode, the zoom magnification becomes approx. 1k.

≥When it has gone into Quick Start Standby Mode automatically with the [ECONOMY (BATT)] (l 33)/[ECONOMY (AC)] (l 33), close the LCD monitor once and open it again.

≥Turn the unit off using the power button.

- 34 -