Panasonic HC-V720 owner manual Connecting to Wi-Fi, Connecting to a wireless access point, 128

Wi-Fi [HC-V720]/[HC-V720M]

Connecting to Wi-Fi

To use the Wi-Fi function, connect this unit to a wireless access point or smartphone via Wi-Fi.

If the clock has been set for the first time, the confirmation message for the Wi-Fi settings will be displayed. Touch [YES], and then configure the access point settings below.

∫About the status indicator and the connection status icon when connected to Wi-Fi





ALit green

≥The status indicator is lit green while this unit is connected to a destination device after completing a Wi- Fi connection.

≥When Wi-Fi is disconnected, the status indicator is lit red again.

BThe connection status icon

When connected to wireless access point:

connected to Wi-Fi/ not connected to Wi-Fi

≥The display will change as follows according to the radio wave intensity: # # # .

When directly connected:

connected to Wi-Fi/ not connected to Wi-Fi

Connecting to a wireless access point

Check if the wireless access point you are using is compatible with WPS.

jIf the wireless access point is compatible with WPS: Proceed to the following [Easy Connection (WPS)]

jIf the wireless access point is not compatible with WPS: [Manual Connection] (l 130)

≥WPS is an abbreviation for Wi-Fi Protected Setup™.

[Easy Connection (WPS)]

∫If this is the first time the Wi-Fi button is pressed.

1 Press the Wi-Fi button.

2 Touch [YES].

3 Touch [Easy Connection (WPS)].

- 128 -